Power amp/stereo power amp suggestions for wet/dry rig

[Panhead5]

This ones easy but for some reason I'm drawing a total blank for a power amp for a wet/dry rig . I know Fryette has some , Synergy has one . I have a Randall RT2/50 I'm using for my Synergy setup . Suggestions ?

 

[Exo-metal]

I use VHT but so many come to mind...KSR, Seymour Duncan 2100, HH, Mesa ect

 

[Code001]

The RT2/50 is a sick power amp that Bruce Egnater made. Is there a reason you don't want to use that?

 

[Panhead5]

The RT2/50 is a sick power amp that Bruce Egnater made. Is there a reason you don't want to use that?

I'm using one side of it now for mono setup . It actually works great . I use the other side for my Synergy rig.

 

[psychodave]

I use either an HH V800 or Mesa Strategy 400. Both are great at what they do and both are very different.

 

[Nigel]

My mini rig. Rivera on half power at 220v B+ biased to 14w each tube idle (should be 7.5) for VH variac brown tone. Amp has direct line out from the speaker which I feed into the 65w Peavey after modulation and delay FX. Slavemaster really brings the big tones down low. Band practice will be cranked. It sounds SO GOOD because all the voltages are right.

 

[TheGreatGreen]

What's your budget?

Arguably the best tube poweramp ever made was the VHT 2150 but they're tough to find for less than a few grand.