Problems with H&K Triamp

[just42dave]

Ok you tech guys Im sure can help..On this amp it a plexi front that has screws with alan wrench type bases...Well to take amp out you have to unscrew 6 to pull amp out of chassis..Shit this sucker was in tight and I seemed to have stripped the base where the wrench goes in!!!
Is there any way I can drill this thing out without hurting anything or is there any other crazy way you guys have handled worse!!!
I really would like to take the tubes out and rebias but if need be I can be stuck with TAD el34 forever till I can send to a HNK tech..

 

[glpg80]

cut two slots on opposite ends of the head, turn it into a flat head screw, and screw it out.

 

[Anonymous]

Get yourself an easy out set I use a "proGrabit" from ace hardware

 

[OldSkoolNJ]

+1 for the Grabit-Pro since it is easily available in most area's for most people..
Lowes,Sears and Ace hardware stores carry them...

Just make sure you get the Pro not the standard, Because the Pro is a lot stronger...

And stay away from the Crapsman version it is total shit...

 

[just42dave]

You guys are awesome!!!!!!