Question for Dave about powering a pedalboard from the rack

[cheptech]

Hi Dave,
I'm curious about the power interface from the rack to the pedalboard in this rig
viewtopic.php?f=57&t=95747&p=1145625&hilit=laing#p1145625
What do i need to build me something like that, besides the enclosures, and dc and mono jacks?
Is just a direct conection between the dc and the mono jack inside the interfaces?
Do you use a regular cable (balanced or unbalanced) between the interfaces?
what kind of enclosures do you use in this particular rig?
I hope you can help me.

Thanks in advance.

 

[RACKSYSTEMS]

Its a box with a 1/4 " jack and a 9 volt jack. With the hot wired to the tip of the jack and ground to sleeve. You can use any cable guitar cord works. Then on the pedal board its the same thing often built into a interface.

 

[cheptech]

Thank Dave!! it works perfect, but now i'm having trouble with the audio conection. I'm getting some lack of tone when i connect the guitar to the interface and the interface to amp (this was my first test to check the conection) vs the guitar straight to the amp. It is normal or i missing something?
Also, what cable is the best to use between this jacks? because i'm using a mogami 2319 miniature (the same that i use for my rack effects drawer to my GCX). Or should i use separate cables?
I hope you can help me.

Thanks
Sebastian

 

[Fallout Labs]

Thank Dave!! it works perfect, but now i'm having trouble with the audio conection. I'm getting some lack of tone when i connect the guitar to the interface and the interface to amp (this was my first test to check the conection) vs the guitar straight to the amp. It is normal or i missing something?
Also, what cable is the best to use between this jacks? because i'm using a mogami 2319 miniature (the same that i use for my rack effects drawer to my GCX). Or should i use separate cables?
I hope you can help me.

Thanks
Sebastian

probably running too much cable unbuffered