Rack Systems Puddle Of Mud pedal board

[RACKSYSTEMS]

Here is a board I did for the Puddle Of Mud guitarist. It is to replicate his larger rack in a small format. Chain is Gtr- Boss Noise Suppressor- Vol pedal-Wah-Providence buffer- loops are phase 90-Boss chorus-Boss phase-Mxr Carbon Copy-Boss ddl/rev-then 3 loops for amps snds for 3 amps of choice transformer isolated . Also on the board is a a RJM amp gizmo for channel switching of any amp. All pedals are powered by the Glab power supply and there is a additional power transformer built into the board to power the Providence switcher and the Amp gizmo. Enjoy

 

[steve_k]

Now, that board has me thinking.....

 

[RACKSYSTEMS]

Bring it on guys.

 

[The Hoff]

I've been seriously thinking about getting you to put a board together for me too. Just want to make sure I am completely certain that it isn't going to change first

 

[Shark Diver]

I've been seriously thinking about getting you to put a board together for me too. Just want to make sure I am completely certain that it isn't going to change first

I'm in the same boat. I've been talking to Dave about a board. I just want to be as close to sure it is what I want pedal wise before beginning. Hopefully next week I can start.

 

[King Guitar]

Dave, I need you to do my board!

+1

 

[steve_k]

I've been seriously thinking about getting you to put a board together for me too. Just want to make sure I am completely certain that it isn't going to change first

I'm in the same boat. I've been talking to Dave about a board. I just want to be as close to sure it is what I want pedal wise before beginning. Hopefully next week I can start.

Me too, but my pedals are over here.....that would be a little costly, back and forth. A simple as mine is though, I think Dave can wire me up without all the pedals.

Steve

 

[Ventura]

Nice work....TOIGHT!!!
Mo

 

[AndyK]

Awesomely neat work Dave!!

But is the delay pedal in front of the amp?

 

[RACKSYSTEMS]

Yes all delays in front.

 

[AndyK]

Yes all delays in front.

Interesting. When I use a delay pedal into a high gain amp, it sounds terrible. They must like it that way for a reason?

 

[steve_k]

Yes all delays in front.

Interesting. When I use a delay pedal into a high gain amp, it sounds terrible. They must like it that way for a reason?

FX loop level control
Simplicity
Tone suck

 

[gbsmusic]

Dave, I need you to do my board!

 

[TrentBizzle]

Dave....
This may have been asked in another thread, but what are your thoughts on the Glab power supply vs the Pedal Power 2+? I notice you use the G Lab stuff on a lot of the boards you do. I've always used the PP2, but am interested in the G Lab stuff after seeing all your work.

 

[joepete77]

Dave, what amps are they running? i know they used to use bray modded Marshall Hw superleads a few yrs ago.

 

[RACKSYSTEMS]

Well they were using rectifiers when I did this. Also as far as the glab I like it because it's a switching power supply so there is no hum field. You could put a wah on top of it and it won't hum. Also the power outs sound the most like a battery that I have heard. It will also work for high current pedals like the Eventides etc.

 

[scottcrud]

I had no idea that Puddle of Mud were still together... Cool pedal board.