Rack Systems rack of the week [ William Laing ]

[RACKSYSTEMS]

Here is a small rack I did for a forum member William Laing. Signal path is wireless or cable into a Custom audio switcher. Pedals in loops in front of the amp are Shiba drive,Evh Phase, Evh flange and the G major. Then it heads out to the pedal board and then to the amp input. The amp of choice is interchangeable with just a different switching cable. I do believe he is using a Pt100 or a Splawn. So the effects send of the head comes back to the rack and hits the Smart gate then a loop for the PItchfactor and loops for both inputs of the Eventide. The Eventide is returned to a mono mixer built into the switcher and out of the switcher to the return of the amplifier. All ins and outs to the amp are transformer isolated in the switcher. Enjoy

 

[glassjaw7]

Looks great Dave! Immaculate wiring as always.

 

[Mark Day]

Very nice!!!



Mark

 

[mikehickey]

always a work of art.

 

[jlbaxe]

 

[mentoneman]

lovely
i love small rigs like this, much more than huge pedalboards or racks.
i can actually imagine transporting and using something like this week to week

w/d/w rig
axe II or gforce--just one multi---
pedal tray with tonepress-arion chorus-zen-plexitone-flashback-el cap
two head switcher w/peacemaker and carol ann
power amp

ground control/volume/wah on floorboard

 

[jcj]

I need to do something like this soon

 

[stephen sawall]

Looks great ....

 

[kasperjensen]

I really need something like that too.

 

[reverymike]

Beauty! But, if he has the Eclipse, why would he also need a Pitchfactor?

 

[charveldan]

Sweet!!! Nice job, ellegance by design,..........Dave, your an Amp/Rack wiring MoFo.

 

[Bronco]

Beauty! But, if he has the Eclipse, why would he also need a Pitchfactor?

My question as well...and is the pedal power powering the Pitch Factor?

 

[Vanlaing5150]

Hey Guys,

As Dave said, there are two loops on the eclipse. I use the eclipse for delays and reverbs loaded individually into channel A and B. I have the Pitchfactor for detune, some harmonizing stuff. This way I have the option of turning them on/off individually without having to change patches. I know, probably a little excessive, but I was looking for maximum flexibility/combinations...

The amps I use with this are a Custom Audio OD100+, 06 Splawn Quickrod, EVH 5150 III head

And no - those aren't the real settings on the pedals...