Radiotron Abaddon Prototype Clip

  • Thread starter Thread starter glpg80
  • Start date Start date
Sounding pretty dang good on my crappy computer speakers. When you rolled your volume up the whole camera started shaking to your rhythm!!! Are those GB loaded cabs?
 
glpg80 said:
Recently finished assembling the prototype and made a quick clip.

No boosts, no EQ. Temporarily removed the effects loop which I am excited to develop next!

Click to expand...

Sounds killer. I don’t know who built your house but it’s solid.
 
VonBonfire said:
Sounding pretty dang good on my crappy computer speakers. When you rolled your volume up the whole camera started shaking to your rhythm!!! Are those GB loaded cabs?
Click to expand...

Much obliged :rock:

Yes 25W greenbacks. Only the straight cab was plugged in.

I’m talking to the chief engineer and owner of Mercury Magnetics to develop my own component for my resonance circuit which you hear here :rock:
 
glpg80 said:
Much obliged :rock:

Yes 25W greenbacks. Only the straight cab was plugged in.

I’m talking to the chief engineer and owner of Mercury Magnetics to develop my own component for my resonance circuit which you hear here :rock:
Click to expand...
I used to have the angled greenback. Great cab but not quite as rich/deep as the straight cab IMO. The round grab handles in mine would rattle and rotate and bleed through in the studio so I would have to tape them down. I rolled mine enough miles that I had to repair a couple pulled out casters, lol. Blessings on your resonance circuit endeavors glpg80.
 
VonBonfire said:
I used to have the angled greenback. Great cab but not quite as rich/deep as the straight cab IMO. The round grab handles in mine would rattle and rotate and bleed through in the studio so I would have to tape them down. I rolled mine enough miles that I had to repair a couple pulled out casters, lol. Blessings on your resonance circuit endeavors glpg80.
Click to expand...

I don’t play the angle cab much. I’d like to trade it for another BX cab.

I’m considering loading the angle cab with something that won’t cut your head off like a G12M Creamback or G12H30 70th Anniversaries. Ideally though I just want another straight cab. I bought both of these as a pair used many ages ago.

The angle cab is perfect for throwing high mids up and into a room. I also find it tighter than the BX cab.
 
glpg80 said:
I don’t play the angle cab much. I’d like to trade it for another BX cab.

I’m considering loading the angle cab with something that won’t cut your head off like a G12M Creamback or G12H30 70th Anniversaries. Ideally though I just want another straight cab. I bought both of these as a pair used many ages ago.
Click to expand...
I understand 100 percent. I never could swing the cost of the additional BX cab. I paid $750 for the angled in like 97 and rolled it home. Then they went to over 1100 bucks at which point is was going to be never. I don't even want to know what they cost now. I was running a 100 watt Plexi RI through mine and never really found it harsh or shrill with the amp cross channeled but the bottom two speakers in an angled cab are the only ones I would ever mic, the angled 2 sound less deep and rich so looking back with 20/20 vision the BX cab is the ticket.
 
You must log in or register to reply here.
Back
Top