FLYINRYAN11
Member
Heres another one:
I make a handful of guitars a year and I made this one from the ground up for myself. Has been one of my personal guitars. No expense was spared and has the best stuff on it available. Excellent condition- Just normal play wear.
*Hand picked Alder Body with a real(no veneer) thick Flame Maple cap- very resonant and alive sounding
* Tigers Eye Finish
*Hand picked Allparts Roasted Flame Maple Neck(has excellent flame figure on it).10'' radius, medium/tall frets. 1 5/8 nut width, very comfortable C profile (.84-.94) Has been leveled,crowned,polished, and fretboard edges rolled. Has a super smooth satin finish.
*Real Bone Nut
*Aged nickel hardware- all the best quality hardware- Kluson, gotoh,switchcraft, etc.
*Has reverse angle tele bridge on it(gives it more of a piano type attack on the wound strings and makes the high strings less tinny sounding, gives them a bit more body and warmth). I much prefer this over the standard tele slant but a traditonal slant bridge will fit also.
*MojoTone Quiet Coil Broadcaster pickups
*MojoTone Vintage Taper Pots
*Reverse tele controls with traditional switching- vol,tone,3 way
Guitar plays and sounds Amazing! Rings out like a bell and is very loud acoustically. Id put it up against anything custom shop costing 3-4x much more. Feel free to reach out with any questions, be more than happy to answer them.
Also, I can send some pics of other guitars iv built/building to show my work.
p.s- no photo filters were used
SOLD
Hardcase included
I make a handful of guitars a year and I made this one from the ground up for myself. Has been one of my personal guitars. No expense was spared and has the best stuff on it available. Excellent condition- Just normal play wear.
*Hand picked Alder Body with a real(no veneer) thick Flame Maple cap- very resonant and alive sounding
* Tigers Eye Finish
*Hand picked Allparts Roasted Flame Maple Neck(has excellent flame figure on it).10'' radius, medium/tall frets. 1 5/8 nut width, very comfortable C profile (.84-.94) Has been leveled,crowned,polished, and fretboard edges rolled. Has a super smooth satin finish.
*Real Bone Nut
*Aged nickel hardware- all the best quality hardware- Kluson, gotoh,switchcraft, etc.
*Has reverse angle tele bridge on it(gives it more of a piano type attack on the wound strings and makes the high strings less tinny sounding, gives them a bit more body and warmth). I much prefer this over the standard tele slant but a traditonal slant bridge will fit also.
*MojoTone Quiet Coil Broadcaster pickups
*MojoTone Vintage Taper Pots
*Reverse tele controls with traditional switching- vol,tone,3 way
Guitar plays and sounds Amazing! Rings out like a bell and is very loud acoustically. Id put it up against anything custom shop costing 3-4x much more. Feel free to reach out with any questions, be more than happy to answer them.
Also, I can send some pics of other guitars iv built/building to show my work.
p.s- no photo filters were used
SOLD
Hardcase included