Routing question for a ISP pro rack G

[Lord Toneking]

I'm working with a buddy building his rack and we're both n00bs

Can someone give a signal chain using these pieces of gear?

Marshall JVM
GCX switcher
ISP pro rack G
MXR Flange
MXR Phase 90
MXR ZW od
Eventide TimeFactor

It's obvious that the TF will go into the loop and the pedals will go in the front of the amp via the GCX. My question is where will the ISP go in conjunction with the TF pedal? Before or after...am I making sense??

Thanks!

 

[Mark Day]

I'm working with a buddy building his rack and we're both n00bs

Can someone give a signal chain using these pieces of gear?

Marshall JVM
GCX switcher
ISP pro rack G
MXR Flange
MXR Phase 90
MXR ZW od
Eventide TimeFactor

It's obvious that the TF will go into the loop and the pedals will go in the front of the amp via the GCX. My question is where will the ISP go in conjunction with the TF pedal? Before or after...am I making sense??

Thanks!

If it is a mono ISP(only has a CH1 and Ch2) then this is the way:

Gtr into CH1(ISP) then CH1 OUT to GCX IN(non buffered as the ISP IS buffered)
Amp's FX Send(series) to ISP Ch2 IN, Ch2 OUT to TF In or to a loop IN before the TF, if you are putting the TF in a GCX Loop.
The ISP Ch2 has to be first after the amp's FX loop send but before the TF or if will cut off the TF's delays.

If your ISP is the Stereo version then PM me.

Mark

 

[Lord Toneking]

thanks Mark!