Show me your home-made pedal board.......

[Kaleiwahea]

I need to:
A) Make one
B) Get ideas in order to do so

Thanks!

 

[turmoil]

i built this one for my old apartment out of some parts i had laying around.

 

[gbsmusic]

Its not the most practical but I dont gig and I wanted to make it look nice. I built about a 1 1/2" step for the middle row so it were easy to push without hitting any of the other pedals..

 

[billm408]

Wow... some serious carpentry going on here.

Mine's a slab of pine shelving screwed onto a piece of 2" hardwood trim on front. A couple of "L" brackets underneath for support & stability. Drill a few holes, spray paint and you're done.

 

[Metalred]

Wow... some serious carpentry going on here.

Mine's a slab of pine shelving screwed onto a piece of 2" hardwood trim on front. A couple of "L" brackets underneath for support & stability. Drill a few holes, spray paint and you're done.

"Easy"

 

[Jordon]

Shitty Cell Phone pic, I'll try to get more tomorrow. 3/4" plank of wood, 20x38" Large rubber feet on the rear bottom, and small feet on the front bottom to give it an angle. 3/4" U Channel, Velcro top, 3 handles, and a microphone stand mount. Took me about an hour to build.

 

[JTyson]

hehehe, my stuff dosent get moved, dont know if this applies or not

 

[stephen sawall]

Wow Jim ..... that looks like the board I have been trying not to build. Hence the rack not being done. Mine when done well be a wa , GCP and two expression pedals.

 

[rsm]

Checkout Ikea's "gorm" shelves. I have the smallest, that is about 12" x 19". They have different sizes. It cost $3. I think the biggest is about $7 or so. It has three boards with spacing to run cables under and up to the pedals; not tall enough to put power underneath (well, except my 1 spot power cord). Good price, solid wood, pine or spruce.

Here's a pic of the 12" x 19"

and the website:

http://www.ikea.com/us/en/catalog/products/50058507

 

[Bash_Man]

Board without Pedals:

Board with Pedals:

 

[Yek]