B
broknstuff
Member
SOLD
Egnater MOD 100 watt 6 channel tube amp (hand made)
I hate to do this but hard times have faced me to sell my collection. Always kept in climate controlled, smoke free home. All handmade in Detroit by Bruce Egnater. If you are unfamiliar with the system, it basically allows you to switch out the preamp dual-channel modules (all tube) with an enormous sounding 100watt power section. Power section includes external bias points so that you can do it yourself without having to take it to a technician or risk opening up the inside of the amp and exposing yourself to high voltages. You can also run just 1 set of tubes (2 tubes total) to get 50 watts. Also has a series effects loop AND a parallel loop. You get the flexibility of a digital system with the sound and feel of an all analog tube system. Each preamp has 2 channels, A and B, each with their own volume and gain (channel A is the low gain version, channel B is a higher gain version). Also compatible with Synergy modules and Randall MTS modules.
Comes with Egnater footswitch and 7-pin midi cable (carries power to footswitch, no external power supply required), and can also be controlled by any external 3rd party MIDI controller as well.
Here is a list of all the dual channel modules to choose from:
• BMAN - based on fender Bassman
• DLX - based on deluxe reverb
• SL - based on Marshall SuperLead plexi
• SL2 - based on hot-rodded Marshall sound
• EG5 - Egnater high gain modules, takes off where the EG3/4 ends. More Soldano type of lead tone.
• COD - California overdrive, Egnater's take on Dumble/mesa mark IIC+
Pictures of modules here:
Egnater MOD 100 watt 6 channel tube amp (hand made)
I hate to do this but hard times have faced me to sell my collection. Always kept in climate controlled, smoke free home. All handmade in Detroit by Bruce Egnater. If you are unfamiliar with the system, it basically allows you to switch out the preamp dual-channel modules (all tube) with an enormous sounding 100watt power section. Power section includes external bias points so that you can do it yourself without having to take it to a technician or risk opening up the inside of the amp and exposing yourself to high voltages. You can also run just 1 set of tubes (2 tubes total) to get 50 watts. Also has a series effects loop AND a parallel loop. You get the flexibility of a digital system with the sound and feel of an all analog tube system. Each preamp has 2 channels, A and B, each with their own volume and gain (channel A is the low gain version, channel B is a higher gain version). Also compatible with Synergy modules and Randall MTS modules.
Comes with Egnater footswitch and 7-pin midi cable (carries power to footswitch, no external power supply required), and can also be controlled by any external 3rd party MIDI controller as well.
Here is a list of all the dual channel modules to choose from:
• BMAN - based on fender Bassman
• DLX - based on deluxe reverb
• SL - based on Marshall SuperLead plexi
• SL2 - based on hot-rodded Marshall sound
• EG5 - Egnater high gain modules, takes off where the EG3/4 ends. More Soldano type of lead tone.
• COD - California overdrive, Egnater's take on Dumble/mesa mark IIC+
Pictures of modules here:
Last edited:
