M
Metalone72
Active member
Up for sale is a R2R Electric 2 Knob Treble Booster – with the highly sought after Phillips/Mullard OC44 Black Glass germanium transistor. I am the original owner and it was bought directly from R2R Electric in September of 2020. See pictures for the actual components used and their years. Unit lived its life in the original box here I never got around to play it. Comes with original box and swag. SOLD
Thanks,
Scott
From the Listing:
Every R2R Electric unit is built with a combination of New Old Stock (NOS) & vintage components recycled from 1950’s & 1960’s audio gear
These are the specs:
Original Dallas Rangemaster circuit with 6 position rotary tone selector switch
Philips/Mullard OC44 black glass germanium transistors
Vintage CTS, Piher, Centralab or Stackpole potentiometers
NOS Philips 47uf electrolytic capacitors
1950's & 60's NOS paper in oil & mylar audio grade input capacitors
1960's NOS Sprague Black Beauty output capacitors
Allen-Bradley carbon comp resistors
True Bypass footswitch
Switchcraft jacks
1950's Bakelite Chickenhead knobs
*Due to the nature of this circuit, these pedals work best placed first in your signal chain. If you are using any buffered bypass pedals (ie: Boss, MXR, etc..) this pedal need to be placed before it in the signal chain. Please feel free to contact me with any questions*
**This pedal can be powered by 9v battery (included) or with a standard Boss/One Spot style 9v power supply**
***Please note that these pedals will not work in a power daisy chain with other pedals that use a standard negative center power supply like a Boss or One Spot. It will need its own isolated power source either it’s own separate power adapter or it works well with a Voodoo Labs or similar power brick***
+++++++++++++++++++++++++++++++++++++++++++++
Each of my pedals are made with high quality vintage components, either NOS (New Old Stock) or pulled from vintage audio equipment.
Each component is tested and matched to each pedal for optimum tone.
I back each pedal with a lifetime warranty so if it ever stops working, send it back and I’ll repair it at no charge (aside from intentional damage)
Every pedal is hand built in Los Angeles, CA
Thanks,
Scott
From the Listing:
Every R2R Electric unit is built with a combination of New Old Stock (NOS) & vintage components recycled from 1950’s & 1960’s audio gear
These are the specs:
Original Dallas Rangemaster circuit with 6 position rotary tone selector switch
Philips/Mullard OC44 black glass germanium transistors
Vintage CTS, Piher, Centralab or Stackpole potentiometers
NOS Philips 47uf electrolytic capacitors
1950's & 60's NOS paper in oil & mylar audio grade input capacitors
1960's NOS Sprague Black Beauty output capacitors
Allen-Bradley carbon comp resistors
True Bypass footswitch
Switchcraft jacks
1950's Bakelite Chickenhead knobs
*Due to the nature of this circuit, these pedals work best placed first in your signal chain. If you are using any buffered bypass pedals (ie: Boss, MXR, etc..) this pedal need to be placed before it in the signal chain. Please feel free to contact me with any questions*
**This pedal can be powered by 9v battery (included) or with a standard Boss/One Spot style 9v power supply**
***Please note that these pedals will not work in a power daisy chain with other pedals that use a standard negative center power supply like a Boss or One Spot. It will need its own isolated power source either it’s own separate power adapter or it works well with a Voodoo Labs or similar power brick***
+++++++++++++++++++++++++++++++++++++++++++++
Each of my pedals are made with high quality vintage components, either NOS (New Old Stock) or pulled from vintage audio equipment.
Each component is tested and matched to each pedal for optimum tone.
I back each pedal with a lifetime warranty so if it ever stops working, send it back and I’ll repair it at no charge (aside from intentional damage)
Every pedal is hand built in Los Angeles, CA
Last edited: