Stereo rig question

[Docster]

I currently run a two amp rig in stereo with a Lehle Little Dual. I have been thinking about picking up a TC Mimiq to provide double tracking. My question is can I place a stereo pedal (the Mimiq) after the Lehle, plugging A from the Lehle into the mono input of the Mimiq and B (Lehle) into the stereo input of the Mimiq, then out to the amps?

Thanks in advance for any feedback.

 

[sg guy]

-yup-

-love stereo rigs, its what I run, I prefer a true stereo rig over any sort of W/D set up.

-I've found what ever device you have to split the signal into stereo is key.....

-rock that bitch!!!

 

[GOHOINC]

I would run this ahead of the Lehle. Send one output to the first amp directly. The second output goes through the lehle, this allows you to use the lehles isolation and lift for any noise produced. Other option is to get a Lehle Dual SGOS or a Voodoo amp switcher which allows for stereo input and output.

 

[RJF]

I'd try it the way you described, post lehle, and the way gohoinc said. See which sounds better and makes the least amount of noise.

 

[RockyStar]

I would run this ahead of the Lehle. Send one output to the first amp directly. The second output goes through the lehle, this allows you to use the lehles isolation and lift for any noise produced. Other option is to get a Lehle Dual SGOS or a Voodoo amp switcher which allows for stereo input and output.

This is the best way to go IMO. The Mimiq is a great pedal.