gibson5413
Well-known member
Where can I buy some? Is there a reputable online store? Thanks!
Capulin Overdrive
New member
LUXXTONE.COM
A
Anonymous
Guest
I've got a 50mm Chrome covered Aldrich Bridge that I'll sell you for $60. Used it in a guitar that never got played and just removed it.gibson5413":2cgoc3di said:
If not, buy it from the guy who sells them on eBay (search and you'll find him). He's got 'em in stock and ships fast...
Steve
J.B.
Well-known member
I think there's set in the classified section.
gibson5413
Well-known member
sah5150":1dihl4x1 said:
The chrome is what I'm thinking but I may have a small problem. I want to replace the stock pickups in my EBMM Petrucci. I have heard that the guitar is a bit stubborn to find pickups that fit just right. I think the chrome would look great with my guitar but fear it may not fit. What do you think?
I'll seriously consider it if I find out it won't be a problem. I have already posted at the Ernie Ball forums.
gibson5413
Well-known member
Capulin Overdrive":2f9lrxfj said:
Thanks!
J.B.":2f9lrxfj said:
Thanks Jason!
J.B.
Well-known member
I had a Suhr guitar once, and went to change out the stock Suhr pickup with a Duncan or something. The Duncan didn't fit. It was too big. So, I think the Suhr's could be a bit smaller in overall size. But I could be wrong.gibson5413":2s9pxh9r said:sah5150":2s9pxh9r said:
The chrome is what I'm thinking but I may have a small problem. I want to replace the stock pickups in my EBMM Petrucci. I have heard that the guitar is a bit stubborn to find pickups that fit just right. I think the chrome would look great with my guitar but fear it may not fit. What do you think?
I'll seriously consider it if I find out it won't be a problem. I have already posted at the Ernie Ball forums.
Capulin Overdrive
New member
if the chrome Aldrich have square corners on the part that the adjusting screw goes in, then it might be a tight fit in some guitars without rounding the corners?
Steve could probably look at his?
know i had trouble with that recently, and think it was the Aldrich? i was gonna round them, but got impatiant and just bent them in instead.
Steve could probably look at his?
know i had trouble with that recently, and think it was the Aldrich? i was gonna round them, but got impatiant and just bent them in instead.
A
Anonymous
Guest
If I was you, I'd call Suhr customer service. I'm sure they'd be able to give you an answer...gibson5413":2z2l317r said:sah5150":2z2l317r said:
The chrome is what I'm thinking but I may have a small problem. I want to replace the stock pickups in my EBMM Petrucci. I have heard that the guitar is a bit stubborn to find pickups that fit just right. I think the chrome would look great with my guitar but fear it may not fit. What do you think?
I'll seriously consider it if I find out it won't be a problem. I have already posted at the Ernie Ball forums.
Steve
A
Anonymous
Guest
Call Suhr customer support - they'll tell you what they use...psychodave":ra414h88 said:
Steve
A
Anonymous
Guest
Too lazy for that.... I'll wait for someone that wants a nickel cover...psychodave":2jvn7kvf said:
Steve
mightyjoeyoungxnj
New member
Buy mine! Brand new!
-Joe
-Joe
projectx102
New member
Dude that clip of you with the Charvel with the Aldrich into the Cameron is killer.I just picked up one here used and one new online for my two Charvels because of your clip.psychodave":215av6qw said:
J
JeF
Member
I'll take the nickel DA . . . . 
pm sent
pm sent
