Synergy modules in an mts head. ?

[mchn13]

So far ive gathered that the synergy modules will work in an mts head, but only on one channel of the module? Do you chose which channel of the module, or is it predetermined by the hardware; i.e. : its always channel 1 only...? I still have two rm100’s sitting around collecting dust, and considering getting one of the engle savage modules to try.::

 

[fek]

So far ive gathered that the synergy modules will work in an mts head, but only on one channel of the module? Do you chose which channel of the module, or is it predetermined by the hardware; i.e. : its always channel 1 only...? I still have two rm100’s sitting around collecting dust, and considering getting one of the engle savage modules to try.::

I still have and love a RM100KH. From what I can remember, there is a switch to pick the channel that will be active. Or maybe that there can be a switch added to pick the channel? Bah! I am not really any help here.

 

[crankyrayhanky]

I think it locks into ch A

 

[chadprsman]

If the channels are different on the synergy module, there is a switch to chose which channel you want.

 

[Kapo_Polenton]

Yes, you need to manually choose which channel you want which may or may not defeat the purpose of having two channels for you.

 

[ned911]

If you have an RM100 yuneo.de has a kit that will enable both channels on the module to work. I've upgraded my RM4.

The only other difference is the Synergy modules can access a 3 way capacitor switch so each module can choose the optimum cathode bias. Jaded Faith has a manual switch mod that does the same thing.

 

[Mailman1971]

That was always the thing.
Owned 6 MTS Amps.
The Egnater modules only fully worked on Their MTS mod Amps.

It’s soooooo worth it to be able to play all channels