This weeks Axe Fx tips and tricks video is all about whammy.

[Max Haze]

In this weeks Axe Fx tips and tricks video it's all about the Whammy pedal. There is a really good trick in the end of the video. This trick can be used with a wha block as well.

Please let me know if you have any questions. Please support me by subscribing to my youtube channel...

 

[Tone Ranger]

This kind of thing was what I talked to you about last time. Good info.

 

[Finnster]

Nice! Can you have the same expression pedal be a Wah and a Whammy in the same preset so you can switch between the 2? I always had trouble with that so I would make a duplicate preset; one with a wah and one with a whammy. I know it can be done by assigning a switch on the pedal board but could never figure it out.

 

[Tone Ranger]

Yes you can. Set the bypass modes opposite of each other.

 

[Max Haze]

This kind of thing was what I talked to you about last time. Good info.

Nice to hear that you liked the video...

 

[Max Haze]

Nice! Can you have the same expression pedal be a Wah and a Whammy in the same preset so you can switch between the 2? I always had trouble with that so I would make a duplicate preset; one with a wah and one with a whammy. I know it can be done by assigning a switch on the pedal board but could never figure it out.

You can do this two ways. If you get an expression pedal that has got a switch you can do like I do in this video...

Or you can sign up a switch on your pedalboard like I do in this video. You just swap the effects that I use in the videos to what you want to use. I hope this make sense to you...