
ultimatemetalguitartones
Well-known member
Has anyone played - owned one? I'm mainly interested in the neck and the playability. I've found a good deal for a slightly used snow-white with gold hardware and it looks stunning
Hmmm I might have to reconsider my options then... Thx for the answer.scottosan":g4cegw00 said:The DK24 2PT with the roasted necks are plagued with tuning issues. Honestly the last 2 2018 and 2019s have been substandard compared to my 2 2016s
They are try before you buy guitars.sotosprince":ck17ke98 said:Hmmm I might have to reconsider my options then... Thx for the answer.scottosan":ck17ke98 said:The DK24 2PT with the roasted necks are plagued with tuning issues. Honestly the last 2 2018 and 2019s have been substandard compared to my 2 2016s
Wow really? That sucks! I've had high high hopes as none of all the videos I've watched indicate those issues. Unfortunately I can't try one, since I'm located in Athens and few people own these models.Inearthed":1jjh665j said:They are try before you buy guitars.sotosprince":1jjh665j said:Hmmm I might have to reconsider my options then... Thx for the answer.scottosan":1jjh665j said:The DK24 2PT with the roasted necks are plagued with tuning issues. Honestly the last 2 2018 and 2019s have been substandard compared to my 2 2016s
I ordered one online and it arrived with poking out frets when you would run your hand down the side of the neck (to the point of scratching your palm), sent it back immediately, no idea how it got out of the factory in such poor shape. Second one was much better, had some major tuning problems but after changing the strings, graphite in the nut slots, etc it held a tune a lot better.
Some people have indicated that they can’t get one that holds a tune even after swapping tuners, a new nut, removing the string trees and blocking off the bridge.
To be honest I ve been looking for a charvel model 1,2 with maple neck fretboard for a long time with no luck. Some people are asking 600 euros which is insane. My only complaint would be the basswood body...swamptrashstompboxes":39kc6qth said:I would go usa or MIJ. The MIM Jackson and Charvels I have played were substantially underwhelming. I have not owned one, but I don't think that I would buy one. I have felt no comment on holding tune, but bad fretwork is too common IMO.
I just realised that the roasted neck one is not the same as the one I ve wanted to buy! That's the one I am talking aboutscottosan":3ll9rkd7 said:The DK24 2PT with the roasted necks are plagued with tuning issues. Honestly the last 2 2018 and 2019s have been substandard compared to my 2 2016s
Nice to hear that!peterc52":1jyaqopy said:I have one without the roasted neck. No tuning problems. And plays well![]()
for whatever reason, they used in extra string tree on the d and g strings that's causing most of the issues. If you look at the NAMM vids you'll see they are coming out with a revised version to address thispeterc52":1v0s58za said:I have one without the roasted neck. No tuning problems. And plays well![]()
It would cost me an arm and a leg to have it shipped from the USA to Athens plus taxesscottosan":31hyx8li said:Or you could spend a few hundred more and just get a Chubtone
Of course!peterc52":3hi2ufpl said:Nice! Let us know how it is!
ewill52":wj1jn4ip said:i've got the DK24 2pt in HSS. LOVE it. I love the neck, plays great. nut was a little sticky when I bought it, hit it with nut sauce, seems to be fine.