Tube layout on BE100?

[LP Freak]

What's the tube layout on the BE100 and what are their functions?

 

[HilltopExplosion]

Check this out

viewtopic.php?f=57&t=164297&hilit=BE100+tube+layout

unless it's changed..

 

[LP Freak]

So is this the correct layout for the BE100 Dave?

Looking at the amp from behind:
(Left to Right)

v1 HBE/Boost
v2 BE/Clean
v3 Cathode Follower
v4 Driver (tube closest to power tubes)

 

[Tom-Andrew]

I'm not Dave, but:
V1: HBE/Boost and clean channel
V2: BE channel
V3: BE channel (including cathode follower)
V4: phase inverter

 

[hammered]

Just a little off subject but I`m gonna guess for the Small Box it`s
V1: Clean/Lead channel
V2: Lead channel
V3: Phase Inverter
Feel free to correct me if I`m wrong

 

[Tom-Andrew]

The BE design is three gain stages and cathode follower.
A plexi design is two gain stages and cathode follower.
You need two tubes (4 or 3 triodes) to do either design, therefore:
V1: BE and plexi channel
V2: BE and plexi channel (including cathode follower)
V3: phase inverter

 

[hammered]

The BE design is three gain stages and cathode follower.
A plexi design is two gain stages and cathode follower.
You need two tubes (4 or 3 triodes) to do either design, therefore:
V1: BE and plexi channel
V2: BE and plexi channel (including cathode follower)
V3: phase inverter

Thanks for that info , I learn something new everyday