Two new Griffin Analog pedals ...

[griff10672]

just finished these up this afternoon ... made sure they were working on the scope ... going to sound/play check them in a few hours .

My versions of Angus's Schaffer wireless tower pre / boost and the old TC Electronics Integrated Pre Amp

 

[JackBootedThug]

nice.....that's the secret to Angus's sound right? Lots of people love that tc unit.

 

[CrystalSky]

Great as always ??

 

[scottosan]

I think the name “Schaffer’s Unit” would sound better tha. “Schaffer Unit”

 

[LPMojoGL]

I've been curious about both of those.

 

[griff10672]

I've been curious about both of those.

I ran them both last night into my Plexi and my 2204 .... with great results ....

I have the IPA running at around 34 volts .... ton of headroom ...

the Schaffer Unit was total ACDC into either amp .... the limiter function is suttle but it adds enough compression to smooth out the top end if you're in " ice pick " range

going to put them back on the scope today and make some final tweaks ...

 

[psychodave]

I wish the integrated Preamp had a little more volume to it. When I have my stock JMP I found it lacking a bit to get high gain. I have a pepers dirty tree and always wanted to ask him about adding more volume/push.

 

[griff10672]

I wish the integrated Preamp had a little more volume to it. When I have my stock JMP I found it lacking a bit to get high gain. I have a pepers dirty tree and always wanted to ask him about adding more volume/push.

unfortunately it's a noisy circuit ... wonder what the dirty tree is being run at as far as voltage ... when I layed out the PCB ... I used the schematic I found that was designed to run at the max of 36 volts ... I was curious to see what the extra headroom would provide tone wise .
I only had the volume at about 10 -11 oclock on the pedal .... there was plenty more .... but there's noise too ...

 

[Techdeth]

nice.....that's the secret to Angus's sound right? Lots of people love that tc unit.

I need one lol

 

[psychodave]

unfortunately it's a noisy circuit ... wonder what the dirty tree is being run at as far as voltage ... when I layed out the PCB ... I used the schematic I found that was designed to run at the max of 36 volts ... I was curious to see what the extra headroom would provide tone wise .
I only had the volume at about 10 -11 oclock on the pedal .... there was plenty more .... but there's noise too ...

~33 volts

 

[Kapo_Polenton]

Is there going to be any Canadian shipping available for these bad boys?

 

[griff10672]

Is there going to be any Canadian shipping available for these bad boys?

I've got a Customer in Canada I've shipped to a few times now .... the cost of shipping was about 45 US .... I can run your address and tell you exactly what the shipping is . I want 100 for the pedal ... plus shipping .