Two Notes Reload 2 Stereo routing help!

[hiOneAdam]

Hello, I am a newbie to stereo world and just had received the Two Notes Reload II two days ago. I am utterly confused as to how I can use my Boss DD-8 in stereo mode with Reload II. I can use the pedal on its own by connecting a single guitar to mono input A and connect output A and B to either two separate amps or other effect pedals. But how does this work with Reload II with two separate FX loops? Do I connect Send A from Reload II to one input of the delay pedal and B to the other and then connect the return outputs from the pedal to respective channels? Your help would be much appreciated!

 

[RossJohnDavies]

Hello, I am a newbie to stereo world and just had received the Two Notes Reload II two days ago. I am utterly confused as to how I can use my Boss DD-8 in stereo mode with Reload II. I can use the pedal on its own by connecting a single guitar to mono input A and connect output A and B to either two separate amps or other effect pedals. But how does this work with Reload II with two separate FX loops? Do I connect Send A from Reload II to one input of the delay pedal and B to the other and then connect the return outputs from the pedal to respective channels? Your help would be much appreciated!

Thanks for reaching out! Ross from Two notes here. So, in this instance First connect your Amp to Reload II and set both channels A and B to Amp using the selectors on the front-face of the unit. Then, take the Reload II FX Sends and run these into the DD-8; then connect the DD-8 outputs to the returns. You will then have to tweak the Dry Wet knobs for each FX loop channel to taste. Provided you have 2 cabinets connected, you will now hear the DD-8 in full stereo! Note that for this setup, please ensure the FX Loop is set to Dual Mono and not the Link A -> B mode. Let me know if this helps!