Two rack processors in series without an external mixer ?

[highgainer]

Hi tone friends ! I was wondering if it's possible to run two Rocktron units in series without any external mixer ? For example : you go from the Piranha preamp to an intellifex blackface then to an Intellipitch and finally to a poweramp ? It seems as long as the hush is not activated and the analog signal is on then it's fine ? Some people use a mixer or a patch switch like GCX or Patchmate, but I guess it's possible to preserve the signal quality and go through two FX processors in series with no issues ? Please help !

 

[Dave L]

Yeah, that'll be fine, those Rocktrons are great for those simpler applications.

 

[Shask]

Yeah, the Rocktrons have an internal analog mixer built into them.

I have been messing with the same idea lately using my Intellifex and Replifex.

 

[srommes]

Yep, no problem. set-up a cc to bypass the unit(s) when not using a preset. You can also just program a clean preset as well. As long as you don’t use the gate and set your mixer accordingly your signal will remain analog.

 

[highgainer]

Thank you guys for the valuable feedback, it's very helpful ))