VH4 insert loop question

bronz79

New member
So..Vh4 has 4 insert loop,one for each channel.
Can I use them as a normal loop? I make an example:

Ch1: VH4 send..>..compressor in..>..compressor out..>..VH4 return,

Or can I add more then just one stomp (or rack) in one insert loop? example:

Ch1: Vh4 send..>..compressor in..>..compressor out..>..other fx in..>..other fx out..>..Vh4 return.

Thanks. :)
 
bronz79":25iosl4a said:
So..Vh4 has 4 insert loop,one for each channel.
Can I use them as a normal loop? I make an example:

Ch1: VH4 send..>..compressor in..>..compressor out..>..VH4 return,

Or can I add more then just one stomp (or rack) in one insert loop? example:

Ch1: Vh4 send..>..compressor in..>..compressor out..>..other fx in..>..other fx out..>..Vh4 return.

Thanks. :)

Yes.
 
Yes, but remember that the loops are after pre amp so pay attention to the operating levels of your units (instrument vs. line / -10dB vs. -4db). No other harm if you mismatch them, except that the end result may not be prefered.
 
Back
Top