Wet/Dry or Stereo? rig... open to ideas.

[sparkle**]

So Here is what I was thinking to do...

I was originally thinking...

Morgan MV45 to Hotplate (set to load)
Morgan DI out to VHT Output A
Hotplate line out to Gmajor (or effects rack)
Gmajor to VHT Output B
VHT SIDE A to Marshall 4x12 ( the cab is actually set up as a stereo if needed)
VHT Side B to (2) 1x12s...

the other option is
WET/DRY/WET
Morgan MV45 to 4x12
Morgan DI out to Gmajor (or effects rack)
Gmajor to VHT
VHT SIDE A/B to 1x12 cab each.

Does this look correct... Would I need a suhr minimix?

 

[Anonymous]

Personally I would go full retard and do D/W/D with 3 4x12s

Amp 1 dry into Cab A
Amb 2 dry into Cab C
Both amps line out / hot plate / DI box to Effects stereo input
Effects out to stereo power amp
Stereo power amp into stereo Cab B

So you get the dry and wet sounds of both cabs, plus a fucking headache

 

[cardinal]

Either essentially should work.

You don't need the MiniMix. If you want analog dry signal in your wet cabs, you'd want something like that, though. You'd want to run the G-Major in killdry mode with that set up.

 

[adrianher]

Personally I would run W/D/W configuration. Since Zachman is helping me with my rig setup in W/D/W I'm driving crazy the way it sound. Maybe try both and let your ear to decide itself

 

[cardinal]

Yeah, from what you set out, you'll be lugging all the same equipment either way (three cabs, Morgan and VHT amp). I'd just run it w/d/w since you'll have everything there.

 

[rokker]

Wdw is the best sound i have ever heard....doubt top it....its awesome

 

[rp108]

Personally I would go full retard and do D/W/D with 3 4x12s

Amp 1 dry into Cab A
Amb 2 dry into Cab C
Both amps line out / hot plate / DI box to Effects stereo input
Effects out to stereo power amp
Stereo power amp into stereo Cab B

So you get the dry and wet sounds of both cabs, plus a fucking headache

You never go full retard.

 

[shgshg]

I would ask the soundman "what do you want?" and whatever his answer is, I'd do that.

 

[guitarman967]

Not a fan of wet/dry. I go stereo as it gives me way more options.

 

[Zachman]

So Here is what I was thinking to do...

I was originally thinking...

Morgan MV45 to Hotplate (set to load)
Morgan DI out to VHT Output A
Hotplate line out to Gmajor (or effects rack)
Gmajor to VHT Output B
VHT SIDE A to Marshall 4x12 ( the cab is actually set up as a stereo if needed)
VHT Side B to (2) 1x12s...

the other option is
WET/DRY/WET
Morgan MV45 to 4x12
Morgan DI out to Gmajor (or effects rack)
Gmajor to VHT
VHT SIDE A/B to 1x12 cab each.

Does this look correct... Would I need a suhr minimix?

When designing my setup, I decided to HAVE the choice to run what I wanted, when I wanted. So It's a WD/D/WD rig, w/ the ability to run mono, stereo, WD/D/WD, W/D/W, W/D, WD/D, W/W/W, D/D/D