whats your plans for your next fiddle?

  • Thread starter Thread starter sebby123
  • Start date Start date
Anderson Classic. It will look like this but will have a humbucker in the bridge instead of the single coil. Hopefully by the end of the year. Unfortunately, all of my extra money will be invested into my basement. Hope to have it done by fall.


09062002_09-09-13.jpg



09062002_09-16-49.jpg
 
I like to get a Single Cut in korina. It'll have to wait a bit though.
 
Suhr Classic T.

Alder body/Maple top - Bengal Burst
White binding, white pickguard
1-piece maple neck, Even C Slim .800-.880
SS Heavy frets

Undecided on the pickups and bridge just yet although I doubt it will have a trem. Just one of the two "hardtail" options. Same neck/frets as my current Suhr, same finish too. Effectively a chicken pickin' twin of my S4.
 
I have 3 planned when ever I can get around to them.

2 YJM clones; one with a floyd and one with a traditional trem and a GMW neck thru Schenker V with floyd and abalone blocks..
 
I've got an X-rays guitars custom George Lynch 3-D skull and Bones guitar that should be here in the next week or so. Can't wait. Wanted one of these guitars since I was a kid.
Lynchguitar.jpg
 
jet66":r5uslt5n said:
AFTER I build a Metro MV 100 kit... Either a Suhr Pro M2 or S6. One of these:

M2IceBlueMetallic.jpg
S6MagentaPink.jpg
Click to expand...

Tough call but due to the extremely thinner neck on the M2 I would go with the S6 also that color is amazing :thumbsup:
 
sebby123":1i0clexw said:
Tough call but due to the extremely thinner neck on the M2 I would go with the S6 also that color is amazing :thumbsup:
Click to expand...
The hard part will be trying one out. I've never even seen one in person, I don't think I have seen any type of Suhr guitar in person, to be honest. :lol: :LOL:

I like your Musikraft idea, too. I love that color, and thought about doing a Charvel clone build with their neck and body. Same color, but maple board and black hardware.
 
Time for another Jazzmaster. I'm still unsure as to which colour.

le00459_t.jpg
or
le00980_t.jpg
 
I'm probably going to be putting money down on a custom Ran Invader sometime soon. :rock:

Other gear on the list:
Digidesign 003+ Rack Interface
Diezel Herbert or Engl Savage/Fireball II (I can't decide!)
Avatar 4x12

Probably an iMac to better work with ProTools if I have any leftover money.
 
jonny toetags":2812yirf said:
sebby123":2812yirf said:
jonny toetags":2812yirf said:
Time for another Jazzmaster. I'm still unsure as to which colour.

le00459_t.jpg
or
le00980_t.jpg
Click to expand...

Burgundy mist FTW! :rock: ,
Click to expand...

That's what I'm leaning towards :yes:
Click to expand...

I played a 62 Relic strat in that color and i wanted to run for my life out of guitar center with it! Damn $3200 price tag :doh: Its my favorite fender vintage finish IMO.
 
jet66":1ifhe0la said:
sebby123":1ifhe0la said:
Tough call but due to the extremely thinner neck on the M2 I would go with the S6 also that color is amazing :thumbsup:
Click to expand...
The hard part will be trying one out. I've never even seen one in person, I don't think I have seen any type of Suhr guitar in person, to be honest. :lol: :LOL:

I like your Musikraft idea, too. I love that color, and thought about doing a Charvel clone build with their neck and body. Same color, but maple board and black hardware.
Click to expand...

I would trust a company like suhr or anderson, to build a consistent product and usually most companies you would buy from have a return policy so you have time to bound with it.
 
I WANT another axe. I'm jonesing for a 7 string JP EBMM. Having something with single coils in it would be nice too.

All things considered though, I need to upgrade my current bass from "firewood' status to something more competent. Looking at Carvins and Stingrays... but that purchase wouldn't happen till next year.
 
Some type of Set Neck Superstrat in Koa or Korina.

Problem is None of the big companies that do nice necks with nice fretwork and fingerboards make long enough blanks for a Luthier ( NOT ME ) to easily put together a guitar like this.( Warmoth, USA Custom say they don't get enough requests to make it profitable). Same blanks 6 or 8 inches longer right ?

AND, of the 4687 companies that make 25.5" scale guitars ,only maybe 3.6 of them make a Set Neck 25.5" scale guitar.

OK I made up the numbers- but you get the point- Suhr has started making a few and PRS has the 305, but I wish more people were making these types of instruments so I don't HAVE to pay $3000. for one.
 
Some cool wish list pieces in this thread. For me it will either be an ash bodied butterscotch/black guard Tele or a Gretsch 6120 or White Falcon.

I would also like to finish a Dimarzio parts project that I put on ice a couple of years ago. I have all the parts (pink neck is NOS...never drilled) to complete, just need to decide on a finish and painter for the body (any ideas?).
DSC00984.jpg
 
I am still gassing for a Nuno N4.
Going to save up for one but in no hurry since my Jackson is doing me fine at the moment. :yes:
 
You must log in or register to reply here.
Back
Top