D
Drkorey
Well-known member
My Cam aldrich is for sale as well:
viewtopic.php?f=6&t=120450&p=1445739#p1445739
viewtopic.php?f=6&t=120450&p=1445739#p1445739
Chris O":10dnh4kf said:Doug sounds like Doug through a Marshall JMD. Think about it.
LP Freak":n0qasn9c said:Clipsjcj":n0qasn9c said:I have the original Cameron that both Doug and John used; how badly do you want that tone?![]()
![]()
![]()
steve_k":3ft51ng8 said:joepete77":3ft51ng8 said:Do golub or suhr or Bradshaw still perform these mods on Marshall's ?
Martin Golub @ LASD will. I have one still from a few years back. I just talked to David Phillips the other day. Martin does these from his place in Portland, not in LA. Adds a gain stage and if you want, a tube DX loop which is great.
It is not the same as when John and Doug used it.jcj":s8xrkn2k said:I have the original Cameron that both Doug and John used; how badly do you want that tone?![]()
![]()
50MkII":rkzqzc17 said:It is not the same as when John and Doug used it.jcj":rkzqzc17 said:I have the original Cameron that both Doug and John used; how badly do you want that tone?![]()
![]()
I was hoping for a more elaborate answer.jcj":15d1vftg said:50MkII":15d1vftg said:It is not the same as when John and Doug used it.jcj":15d1vftg said:I have the original Cameron that both Doug and John used; how badly do you want that tone?![]()
![]()
![]()
![]()
Sorry to pull up an OLD thread, but the insert you speak of on the Cameron...is this the same type of insert that Joe Holmes used with the PCM41 ? Anyone know ? Thanks !steve_k":n6d2vgx3 said:joepete77":n6d2vgx3 said:Do golub or suhr or Bradshaw still perform these mods on Marshall's ?
Martin Golub @ LASD will. I have one still from a few years back. I just talked to David Phillips the other day. Martin does these from his place in Portland, not in LA. Adds a gain stage and if you want, a tube DX loop which is great.
Bradshaw = MIA and off the radar.
Suhr - Not doing them anymore, however he will do the modification to one of his new Handwired amps, or at least he told me he would.
Cameron - the heaviest hitting of the Aldrich mods. Find a used one or go through the backdoor. I still have one that has been around the block. This is the only one I have seen with an insert for the PQ3 on the back end (the way Doug ran his).
Gower - Dan built me a one-off custom Aldrich circuit with a few other post EQ bells and whistles. It's a work horse and highly recommended if you need some specialty switching and other options.
There's one of the very few that John Suhr did, that I used to own. Greg has it now (Hard & Heavy). Same set up as Golub's, but has a switchable loop. There's rumor around that he may be sellingand if he does, it is one of those that you need to check out.
Chris O":34x4fd5e said:Doug sounds like Doug through a Marshall JMD. Think about it.