maddnotez":17bwe83v said:
[Ok, A couple mopre questions.
Can I use a powered PA for the power amp?
Can I use my impact twin interface as the converter? (someone said no, but curious as to why not)
How much does it cost for the metal pack? I downloaded the free Jam up app a while back but never got around to looking at it.
Don't see why not....
I'm really not sure, but I don't think so. Most interfaces will work as long as you can go from the interface to the docking port of your phone/iPad, and they're specifically designed for this or have that capability built in. The Jam was built for this exactly, and so was the iRigHD. The Apogee One wasn't built exactly for this, but it's capable of being used this way.
Molten would know more about this.....the JamUp Plug goes from the guitar into the headphone jack, and it's not really the way you want to do it. You CAN, for practice or whatever, but you're not going to want to run a rig out of your headphone port....it'd sound like ass.
Also, if you're going to go into a cab or whatever, you need BIAS....JamUp won't allow you to disable a cab sim, and BIAS will.....so you make an amp in BIAS, disable the cab sim, and then throw it over to JamUp with the cab sim disabled and THEN run it through a cab or PA or whatever. Again, Molten would know more about that.
Metal pack should cost about $10....but BIAS is $20 and you get ALL the amps that are available in JamUp including all the metal amps...so drop the $20 for all of the amps and then you've got usable stuff for when you want to run a full rig with it.
BIAS comes out for iPhone tomorrow if that's what you're using.