L
Lord Toneking
New member
I hate those wall warts 
SkyhighRocks
New member
I was told by voodoo that it will power a g30...not sure about the 50.
JakeAC5253
New member
What does the G50 need?
tweed
New member
It will power the 50 with no problem. I think I have mine on port 5 or 6 as they have higher output. A tech from Line6 posted the info on their forum. I'll see if I can find it for you.
XSSIVE
Well-known member
I power my G30 with a PP2+ no problem.
JakeAC5253
New member
tweed":1f1v7ps3 said:
Those ports only have higher output if you move the switch on the bottom of the unit away from "normal". With the switches in the "normal" position, all ports have a stable 9v output.
L
Lord Toneking
New member
So do I need the orange/red end cables or just the standard 9v barrel?tweed":2wxkv3k4 said:
tweed
New member
Lord Toneking":3vth5goc said:So do I need the orange/red end cables or just the standard 9v barrel?tweed":3vth5goc said:
Right now I'm just using the standard cables that came with the PP2+. I haven't had any dropout or power issues at all. In fact on Saturday night, I walked off stage, thru the crowd, out the front door and down the street and had no issues. I can't seem to put my finger on the post from tech yet, little crazy here at work, but I'll post a link when I find it. It's possible that it's on the voodoo labs forum as well...
NinjaRaf
Well-known member
I power my g50 with a onespot...Im sure the pedal power will do fine.
squank
Active member
Same here, along with 10 other pedals on the same One Spot. Shouldn't be a problem.rbasaria":2ebjdy1x said:
Similar threads
