Wiring up 2 EMGs.

[Inearthed]

I have this switch

The EMG Volume and Tone controls with the capacitor and another wire running between them. I also have the stereo jack and the battery clips. The pickups being used will be an 81 (neck) and an 85 (bridge).

I'd like to set the controls like so.. Volume - Switch - Tone.

The wiring on the EMG site doesn't shot how to do this, unfortuantely. If anyone has a diagram (or maybe even a picture) of this setup? Also, the switch looks different as well.

Any help would be appreciated as I'm trying to do this myself.

 

[Code001]

Download the ZW Set Instructions. They have the diagram in there.

 

[Inearthed]

         

Download the ZW Set Instructions. They have the diagram in there.

Differs from what I'm asking though they have it set up as Switch Vol Tone. I'm worried about the capacitor, mainly, as the distance between both the Vol and tone will be too far for it to stretch.

 

[Code001]

Just cut it and extend it with a piece of wire.