mctallica1":1rwgq2ex said:
If you get past all the bullshit in this thread, there is a lot of great information here.
I’ve been playing for a LOOOONG time and have gone through a metric shit ton of high end high gain amps, but have virtually zero technical knowledge. Given all the experience I have, I do know what I like, but couldn’t tell you what resistors, caps, etc get me there.
Like I said.... lots of bullshit, but also some excellent info
T
Here's some more excellent info:
Buy a Ceriatone 50-watt Chupacabra.
1. Change first two cathode resistors to 2K7
2. Swap the first two coupling caps around
3. Lower first plate resistor to 330K... or a 100K bypassed with 330pF in series with 220K
4. Revert the rest of the circuit back to STOCK Marshall specs (tone stack, PI, NFB, remove depth control, add the missing 10K B+ dropper, etc.)
5. Change the "feel" push/pull control's resistor to 68K and change the V1b input grid resistor to 68K
That will get you 99.99% of the way to your dream djent machine.