fuzzyguitars
Active member
i am really happy that the modular stuff is out again.
still play my egnater mod100 with sl2x and eg3/4x
still play my egnater mod100 with sl2x and eg3/4x
CrazyNutz":111gp3u1 said:jkdsteve":111gp3u1 said:I modded the input of two of my amps with different coupling caps...it made a lot of difference to my RM50s and sweet on the RM100
Also Salvation MDA board is great replacement for stock Presence/Density controls...I have two amps with Foglifters too.
By far the best mod is to have Friedman do a workup on the amp.....and here we are finally with some signature Friedman stuff in modular form....kind of how I got here, that and lusting after BE/HBE amps for so long
Have you tried the synergy modules in your randall amps yet? I'm interested in how that sounds.
jkdsteve":3tm78eec said:I really need to do that because my RM50 is my favorite amp along with my Randall 4x12...going to be limited Channel A unless I sling my SYN2 into the mix! \m/
CrazyNutz":g02h9yev said:jkdsteve":g02h9yev said:I really need to do that because my RM50 is my favorite amp along with my Randall 4x12...going to be limited Channel A unless I sling my SYN2 into the mix! \m/
If they sound good, i'm going to mod my rm100 to allow switching the duals. It just one simple pin you have to ground with a switch on the back plane.
gtrlw":2wlyzwcn said:I have a Syn1 and a SLO module arriving next week. Live use is key for me. I will let you guys know how it works for me.
CrazyNutz":3d9e9rid said:jkdsteve":3d9e9rid said:I really need to do that because my RM50 is my favorite amp along with my Randall 4x12...going to be limited Channel A unless I sling my SYN2 into the mix! \m/
If they sound good, i'm going to mod my rm100 to allow switching the duals. It just one simple pin you have to ground with a switch on the back plane.
jkdsteve":38rbrqax said:CrazyNutz":38rbrqax said:jkdsteve":38rbrqax said:I really need to do that because my RM50 is my favorite amp along with my Randall 4x12...going to be limited Channel A unless I sling my SYN2 into the mix! \m/
If they sound good, i'm going to mod my rm100 to allow switching the duals. It just one simple pin you have to ground with a switch on the back plane.
They sounds OK in the Randall '50...really must check my bias..it's been sat idle a year!!!
Sounds better and both channels with the Egnater M4 into the RM50...best sounds is from the SYN2 though - mojo on the input circuit?
CrazyNutz":3nspskf9 said:jkdsteve":3nspskf9 said:CrazyNutz":3nspskf9 said:jkdsteve":3nspskf9 said:I really need to do that because my RM50 is my favorite amp along with my Randall 4x12...going to be limited Channel A unless I sling my SYN2 into the mix! \m/
If they sound good, i'm going to mod my rm100 to allow switching the duals. It just one simple pin you have to ground with a switch on the back plane.
They sounds OK in the Randall '50...really must check my bias..it's been sat idle a year!!!
Sounds better and both channels with the Egnater M4 into the RM50...best sounds is from the SYN2 though - mojo on the input circuit?
Yes, most likely the input circuit. Trace the Schematic, or take some high res photos
What differences are you noticing? higher/lower gain, darker/brighter, tighter/looser?
stephen sawall":3hh8uzpf said:Fryette Dynamic Sensing Technology
jkdsteve":75e8rg9v said:stephen sawall":75e8rg9v said:Fryette Dynamic Sensing Technology
Feels like some kind of expander/limiter i.e. compressor to be honest.
Piero the Guitarero":17p9b060 said:for all those who are not following Synergy on Facebook,
made this screenshot last week (when it was "new")
DeathbyButterslax":1e7252ey said:Piero the Guitarero":1e7252ey said:for all those who are not following Synergy on Facebook,
made this screenshot last week (when it was "new")
I wonder how they will tackle the Vh4? Just the 3rd channel I'm guessing? Would be pretty cool to have a BE- VH4 channel 3- HBE amp
Gotta say, that was pretty impressive. The 68 had a little more bite but it was still close.gtr31":3a3kunnx said:Not many things are truly challenging when it comes to a/b tests
This one IMO deserves posting one of them is a 68 plexi
The second a Synergy module can you spot the module and real amp
No looking at the description just use you ears. Good luck
can't get link to save , comp issues see below
https://www.youtube.com/watch?v=QTxwesu8FdU
gtr31":2ug81vq4 said:Not many things are truly challenging when it comes to a/b tests
This one IMO deserves posting one of them is a 68 plexi
The second a Synergy module can you spot the module and real amp
No looking at the description just use you ears. Good luck
can't get link to save , comp issues see below
https://www.youtube.com/watch?v=QTxwesu8FdU