For Sale Griffin Analog Pedals ( updated 08/10/25 )

  • Thread starter Thread starter griff10672
  • Start date Start date

To buy, sell, or trade in this section, you must have at least 50 posts and have two-factor authentication enabled.

griff10672

griff10672

Well-known member
Price
Shown
MXR Micro Amp plus clone 85.00 In stock

Mad Prof Royal Blue Drive clone 135.00 In Stock

Butler Drive ( adaptation of the BK Butler Tube drive ... transistor based circuit ) 85.00 In stock

LovePedal Eternity Drive clone 135.00 In stock

808 Scream Extreme ( my 808 Screamer with more gain on tap ) 135.00 In stock

Blacked Out Griffin Analog Superdrive 135.00 In stock

Mr. Mansfield's Pre Amp ( see attached vid ) 150.00 In Stock



Hatter's OD - OCD Clone with Mods ( has dip switches inside allowing you to tailor the circuit to it's different revisions over the years plus a diode clipping variation ) 135.00 In Stock

Buxom Boost Clone ( Betty ) 135.00 In stock

Fortin Modded TS808 clone 135.00 In Stock

The modded Rat I did for the RT forumites but with different graphics - has added presence control ... and three different clipping diode options ( stock silicon , LED and germanium mixed with transistor ) 135.00 In stock

Spaceman Equinox clone ( Pullman/Pulteq rack EQ in a pedal format ) 150.00 available to order 3-4 week wait time

Scythe ( VFE Focus Clone ) 150.00 In Stock

Super Dupah Drive = 150.00 In stock

This is a Swiss Army Knife of a SuperDrive ..... it's my stock rendition of the SD-1 with two rotary pots ( Freq and Clip )

the Freq switch lets you tighten or broaden ( fatten or thin out ) the bandwidth of the clipping ... very useful for the guys that love the Sd-1 but have issues with Bass frequencies with certain amps or the guy that plays a Strat and wants the Sd-1 a little thicker ...

the middle position is stock ......you have two options below and above stock that will go thicker or thinner

The Clipping Switch changes the diode clipping type and configuration ... you have 5 options

stock silicon asymmetrical
silicon symmetrical
combo of transistor and LED in a asymmetrical setup
LED's in a symmetrical setup
a different type of silicon diode ( BAT42's ) in asymmtrical setup
 

Attachments

  • 20250415_184648.jpg
    20250415_184648.jpg
    192.9 KB · Views: 129
  • 1000001792.jpg
    1000001792.jpg
    346.9 KB · Views: 49
  • 1748110942420.jpeg
    1748110942420.jpeg
    229.7 KB · Views: 58
  • 1748110917915.jpeg
    1748110917915.jpeg
    342.8 KB · Views: 56
  • 1748110900602.jpeg
    1748110900602.jpeg
    311.1 KB · Views: 59
  • 1748110877105.jpeg
    1748110877105.jpeg
    266.7 KB · Views: 59
  • 20250810_101038.jpg
    20250810_101038.jpg
    383.8 KB · Views: 15
Last edited:
Here is the problem. I already have the superdrive, which is a great fucking pedal. Top 2 boost I have ever used (other top 2 is your chiron, which is the only boost currently on my board).

Even having the pedal already, i find myself almost pulling the trigger on this black on black!
 
Smash said:
Here is the problem. I already have the superdrive, which is a great fucking pedal. Top 2 boost I have ever used (other top 2 is your chiron, which is the only boost currently on my board).

Even having the pedal already, i find myself almost pulling the trigger on this black on black!
Click to expand...
I appreciate the feedback and support !
 
fek said:
Sent the cash and had tracking within minutes. Looking forward to shooting this out with my go to SD-1.
Click to expand...
Yeah .... I wish I brought the other one with me this morning ..... RedB4Black has to wait till I get back on Monday now ....
 
fek said:
Sent the cash and had tracking within minutes. Looking forward to shooting this out with my go to SD-1.
Click to expand...
I have one of these. The noise floor is so low, it's unbelievable. I don't think you will be disappointed. Looking forward to reading the comparison thread.
 
Smash said:
I had a made in japan 80's model sd-1. Was yhe best boost i had ever used, but noisy as fuck. The superdrive from griffin was way quieter and even better sounding. It is a no brainer for a marshall circuit amp
Click to expand...

I have an SD-1 that I like a lot but hate the way it looks. This looks a lot better and hopefully sounds a lot better too! Now need a blackout Chiron to replace my DemonFX Klone which I also like a lot
 
RedB4Black said:
I have an SD-1 that I like a lot but hate the way it looks. This looks a lot better and hopefully sounds a lot better too! Now need a blackout Chiron to replace my DemonFX Klone which I also like a lot
Click to expand...
I can do that ......
 
GuitarGuy08 said:
I have one of these. The noise floor is so low, it's unbelievable. I don't think you will be disappointed. Looking forward to reading the comparison thread.
Click to expand...
If you have one of the RT ones ..... those are the ones I started using the Vishay Box films in ....... they have a little more clarity to them then the Kemets and Wima's I had been using ....
I like them so much ...... I'm using them pretty much in all my newer builds .
 
griff10672 said:
If you have one of the RT ones ..... those are the ones I started using the Vishay Box films in ....... they have a little more clarity to them then the Kemets and Wima's I had been using ....
I like them so much ...... I'm using them pretty much in all my newer builds .
Click to expand...
I do not recall if it was stated as such when I got it. This is the pedal I won in a giveaway you did some time ago.
 

Attachments

  • IMG_20250220_100447487.jpg
    IMG_20250220_100447487.jpg
    1.2 MB · Views: 52
You must log in or register to reply here.
Back
Top