curious if anyone can point me in the right direction to find a particular strat schematic

[doctorunderhill]

i've got a strat with three SD hot rail pickups, std 5 way switch, 2 tones/1 vol pot. i'm trying to find a schematic that incorporated 3 separate mini toggles to split the coils on all three p'ups.
thanks

 

[Dan Gleesak]

i've got a strat with three SD hot rail pickups, std 5 way switch, 2 tones/1 vol pot. i'm trying to find a schematic that incorporated 3 separate mini toggles to split the coils on all three p'ups.
thanks

Not sure of an exact schematic, but I imagine you would just wire each pickup to its respective mini toggle, then from the toggles to the 5 way switch the same way you would a standard set up

 

[Code001]

A push/pull is just a mini toggle attached to a pot. You can wire it up exactly the same way. Do this for every pickup: https://docs.google.com/viewerng/vi....com/images/wiring-diagrams/1H_1VppSPL_1T.pdf

Red + White soldered together at the center lug. Ground the outer lug.

Splitting works by grounding the red + white wires on a Duncan pickup.

 

[Dan Gleesak]

A push/pull is just a mini toggle attached to a pot. You can wire it up exactly the same way. Do this for every pickup: https://docs.google.com/viewerng/vi....com/images/wiring-diagrams/1H_1VppSPL_1T.pdf

Red + White soldered together at the center lug. Ground the outer lug.

Splitting works by grounding the red + white wires on a Duncan pickup.

This is a excellent idea