Leo Diezel

Yes, it is fine to run a mixture of power tube pairs(!) in the Einstein. The inner and outer tubes work as a pair. In any case bias...

MIX 1.0 = fully serial, MIX 0.0 = fully parallel, Unity gain in fully serial can be acheived for example this way: SEND LVL = 0.5...

Hi Leo, thanks for your help. The big part of the problem was that the channel volume was set too high. i had changed the channel...

I think speaker/cabinet choices, the band mix, and the playing environment itself have a more significant effect on our individual...

I own the VHX about 1,5 years now, and i feel confident enough to give my 2 cents. Channels: green (ch1) : clean to edge of breakup...

Level is stil LOG on 5.04, I'll find a solution quick!

2. Is back to 4.12 due to most beta users liked it better 1. I will check in the morning, I don't recall if it's back to linear as well!

ok, thanks. Good to hear you guys keep improving and developping things 👌

Sure, Please find below: MANUAL: https://www.diezelamplification.com/manuals/en/VHX_OM_5_04.pdf #5.00 ADD PEQ effect with 2 completely...

Ok so that could mean that there may be something external to the amp. This means that the hum should disappear if you roll back the...

Please remove the guitar cable and check if the noise is still there. Thank you

+1 for the intelligent harmonizer. I got my brand new VHX two weeks ago and i love it so far! I sold my kemper and i dont look back...

The preloop is actually fully analog and releay based, so we could not add anything digitally to it!

Unfortunately there is not a release date planned, but it's near on the list of the TODO's!

Thank you for such a long involvment! As power tube with VHX you can use the same as VH4, so EL34, 6L6 and KT77. KT88 and 6550 are not...