
EddyLenz
Well-known member
Hey Guys,
I finally got my H&H V800 back from service, so I had to quickly try it with this awesome Plexi before it goes back to its owner this week.
I restored the Plexi to about '68/69 specs but with higher filtering. Unfortunately, all the original signal and cathode caps were removed in what looked like the 90s and replaced with completely wrong value caps lol. I put in mostly TAD Mustards. It's got new JJ preamp and power amp tubes and F&T filter caps.
The rack is basically the Joe Holmes live setup with an SE70 and 2x SDE3000 + H&H V800
For this setup I used my 1991 Marshall 1960BX miced with an SM57 and a Lenz 2x12 that has one of the Greenbacks from the 1960BX, miced with an SM58.
No FX in the DAW.
I finally got my H&H V800 back from service, so I had to quickly try it with this awesome Plexi before it goes back to its owner this week.
I restored the Plexi to about '68/69 specs but with higher filtering. Unfortunately, all the original signal and cathode caps were removed in what looked like the 90s and replaced with completely wrong value caps lol. I put in mostly TAD Mustards. It's got new JJ preamp and power amp tubes and F&T filter caps.
The rack is basically the Joe Holmes live setup with an SE70 and 2x SDE3000 + H&H V800
For this setup I used my 1991 Marshall 1960BX miced with an SM57 and a Lenz 2x12 that has one of the Greenbacks from the 1960BX, miced with an SM58.
No FX in the DAW.