Code001":3vs56a0f said:
There's really nothing on the market that will allow that many amps. If you can find the old Bradshaw switchers, those will work great (if you find the preamp switcher, he can mod it to switch heads). Sound Sculpture made a nice one, but they haven't been selling theirs for a year or so.
Actually, Bob has re-released his 4 amp switchers:
AMP SELECTORS ARE BACK!
Due to popular demand, CAE Amp Selectors are back in limited production quantities.
As part of the Custom Series, this is the popular "Version 1" style, which allows selection of up to 4 Tube amplifiers, and connects the amps to a common load speaker cabinet. Unused amps are protected, and of course, only one amp is allowed active at a time. Line Level output (rear panel) is also available (with Level Control) to allow for a "wet/dry" effects setup. A rear panel tuner output is also provided, and is active even when no amps are selected. All amp sends are transformer isolated to prevent ground loop hum. This unit is midi controlled (via Program Change Commands) and comes with a dedicated 4 switch Midi Foot Controller, and 20ft 4 pin xlr connection cable! As a bonus, the amp selector (via the footswitch) outputs the same program change commands to control effects processors, if necessary.
This is unit is part of the Custom Series, and is hand built to order by Bob Bradshaw, and is available direct from CAE only.
Deposits are being taken now for early 2008 delivery.
I may actually have the 1st one: Actually I had him modify an older unit, but he said the only thing he used was the circuit board, and it got a totally new chassis and everything else: