N
nwright
New member
Very unscientific, but here are some clips:
First, all the controls on both amps were set the same on the lead channel. Here are the pics:
Here are the raw, non-EQ'd clips. these are straight from the 57 on my Diezel 4x12 into the DAW. I lowered the waveform volume of the 100 watt to closely match the 50. At the same volume knob setting, the 50 was quieter (obviously).
Limiter is added on the master buss to get proper levels.
50 watt:
100 watt:
here they are with a little bit of EQ in my DAW...Still the same miked tones:
50 watt:
100 watt:
First, all the controls on both amps were set the same on the lead channel. Here are the pics:


Here are the raw, non-EQ'd clips. these are straight from the 57 on my Diezel 4x12 into the DAW. I lowered the waveform volume of the 100 watt to closely match the 50. At the same volume knob setting, the 50 was quieter (obviously).
Limiter is added on the master buss to get proper levels.
50 watt:
100 watt:
here they are with a little bit of EQ in my DAW...Still the same miked tones:
50 watt:
100 watt: