Monkey Man
Super Moderator
He wasn't a serial killer.Hang on. What? A serial killer on here?
"Only" committed 1 murder as far as we know.
He wasn't a serial killer.Hang on. What? A serial killer on here?
Oh that’s ok then. Just a single murder is fine.He wasn't a serial killer.
"Only" committed 1 murder as far as we know.
Healthiest guy on earth, with the healthiest diet ever... but stay up all night bullshitting people online, then go to bed in the morning to sleep during the day.Ok guys, have a great night!
04:15 am here in Germany - I'm off for today
Speaking of amps, you get your issues sorted out on your build?
Adding attenuators or voltage dividers will drop signal out of the circuit and clear that up. Even a resistor to ground can solve the problem. Just depends on how much signal needs to be dumped.It's not 100% yet, but is playable. Right now I have a 12AU7 in V1 and don't get any blocking distortion even with knobs dimed. Anything else in V1 will cause at least some blocking distortion. From the advice I got in the tech section I need to swap out a couple of caps with lower value ones. I don't have anything on hand and have to order some.
Say... That pot idea is nifty. I'll keep that in my back pocket.Adding attenuators or voltage dividers will drop signal out of the circuit and clear that up. Even a resistor to ground can solve the problem. Just depends on how much signal needs to be dumped.
You can always temporally hook up a 1M pot wired as voltage divider between the output of one stage and input of the next. Essentially creating another gain pot, and see if you can make the problem go away with it.
Derailing. This thread is a runaway train destined for the abyss, and your on-topicness disrupts that.I feel a little bad derailing (or is it rerailing?)
Ah, I knew it. It felt wrong at the time…. Apologies all! I should have kept my powder dry, waited for this thread to be nuked and then started a new one asking about the PMM. What do you all think - maybe 5 posts before things go sideways?Derailing. This thread is a runaway train destined for the abyss, and your on-topicness disrupts that.
Adding attenuators or voltage dividers will drop signal out of the circuit and clear that up. Even a resistor to ground can solve the problem. Just depends on how much signal needs to be dumped.
You can always temporally hook up a 1M pot wired as voltage divider between the output of one stage and input of the next. Essentially creating another gain pot, and see if you can make the problem go away with it.
Healthiest guy on earth, with the healthiest diet ever... but stay up all night bullshitting people online, then go to bed in the morning to sleep during the day.
That is not a single lie he tells that he won't contradict right after.
Happens that part of the answer is at the bottom of the same page @thegame posted last night regarding Post #193 of this thread:Hang on. What? A serial killer on here?
Notice how he didn't answer your question, he just told you you can't find them. He has them allLarry, where do you get your Beyschlags? I have to order multiple values from Netherlands. Mouser has some, but not all values.
The Beyschlags are 3 to 4 times the price of the most commonly used carbon film. But they are are outstanding resistors. I use them exclusively in the Hellion.
By the way, I have this amp, it's the Hairy - British Pubiest, that I'm thinking of letting go. Do you think I should just sell it or should I offer it as a trade for another Hairy amp, the Pubes & Mierda Machine?Haha you poor jealous boy.
I'm so healthy that 5 to 6 hours of sleep a night is enough for me.
When your soul is well, you don't need so much sleep.
This is due to the changed hormone production.
I've been out of bed for an hour now.
So you can now calculate how much sleep I had...
... as long as your head is already free enough from your consumption to do so again
By the way, I have this amp, it's the Hairy - British Pubiest, that I'm thinking of letting go. Do you think I should just sell it or should I offer it as a trade for another Hairy amp, the Pubes & Mierda Machine?
By the way, I have this amp, it's the Hairy - British Pubiest, that I'm thinking of letting go. Do you think I should just sell it or should I offer it as a trade for another Hairy amp, the Pubes & Mierda Machine?
I bet a Larry amp by the toilet would recycle all the shit you take!!! As long as they dressed as a Caterpillar. LOLThis could be a good use for it...
View attachment 297095
But you could stop by and help me move the Larry British Pubiest to the floor, since you can easily lift the entire house with all the amps and cabs, including all the Cameron, Hermansson and Dumble amps, since you run three marathons a day, lift over 5 tons per second, jump the Grand Canyon with your eyes blinded(sorry, I forgot you're blind for real, my apologies).If you place the amp upright on the floor, you could use it as a stool and play the guitar while sitting, since you can't bear the weight of a Les Paul hanging on your neck for more than 5 minutes anyway.
You can't use it as an amp for much longer anyway, because I activated the self-destruct electronic via satellite, which feeds wall voltage into the entire circuit after exactly 100 hours of operation, thus destroying all components on the board.