Amp Switcher 1 to 3

[alazarus13]

Hi everyone,

I am looking for an amp (signal) switcher and was thinking to buy Lehle 1at3 SGoS amp switcher but is kind of expensive.

I am looking to run my 3 Marshall amps, each connected to their own cab, so I do not need something fancy, but also do not want something that will visibly eat the sound quality.

Tnx

 

[Dave L]

Easier to get away with using a more cost-effective passive solution if you are feeding it a buffered signal. With that said, transformer isolation and phase flip is key if you´re ever going to use several amps at the same time.

 

[Techdeth]

Keeley framptone . Phase cancellation and no tone suck

 

[Anje]

Lehle are great, worth it to me.
I had the Framptone years ago, nice as well.
Lots of good options those days.

What are you trying to do exactly? What are you use cases?
Need can be different if you "only" want to switch from one to another amp, only one "on" at a time; or if you want to use whatever combination of the 3 at any time.
Depends also on the rest of the rig/gear & signal chain you want to use in front of the amp(s).

 

[skoora]

Morley made a 3 way one too as a Lynch model I think.
…just searched, they make an ABC pro as well with phase etc.

 

[alund]

I have the Lehle ABY pedal. The Y can get a ground loop so I bought the (p-split) I believe it is called and it created another isolation. Really nice. It’s reasonable for different amp a/b-ing at home. Great for blending heads. Not really good for gigs. Unless I guess 2 or 3 combo amps. These ain’t cheap. Mine however was well worth it.