
Tommy
Member
The OFR route. Distance between stud holes are 67.5 millimeters. It should be 74.3 mm in order for the floyd to fit, ya know?
As you can see, the upper hole is about 3/8", or 10mm to far towards the lower one. Doesn't really matter that it's misaligned with both the neck and the pickup routes, cause i'd never be able to get a floyd on there anyways...
Inside the spring cavity
Is this supposed to be aligned with the heel? Not sure if it's the hole rout that's misaligned, or just the stud hole... Anyways, a shot of the back side.
That's the lowdown. I won't be able to fit a floyd here...


As you can see, the upper hole is about 3/8", or 10mm to far towards the lower one. Doesn't really matter that it's misaligned with both the neck and the pickup routes, cause i'd never be able to get a floyd on there anyways...
Inside the spring cavity

Is this supposed to be aligned with the heel? Not sure if it's the hole rout that's misaligned, or just the stud hole... Anyways, a shot of the back side.

That's the lowdown. I won't be able to fit a floyd here...