BE 50 sounds tinny with no dynamics

[Screenbuzz]

Plugged into my amazing BE-50 amp and the sound suddenly is tinny with no dynamics. Clean channel sounds normal. Went through diff guitars, cables and channels still the same. Does it sound like a tube or something worse?

 

[SpiderWars]

Once you've eliminated things external to the amp like cables/guitar/speakers or something in the FX loop then suspect tubes first. Preamp tubes are easy to swap out and verify operation, just do one at a time and if it's not that tube put the old good tube back in and check another.

 

[Screenbuzz]

Well I Replaced every pre amp and power tube one by one....still the same...i don't think it's a tube.

 

[SpiderWars]

One last thing you could try would be to plug a known good cable from Send to Return. If that fixes it then you have a faulty jack. If that isn't it then you might have to take it to a tech.

 

[LP Freak]

If you can’t get it figure it out just email Dave he’ll walk you through it

 

[Adambomb]

Well I Replaced every pre amp and power tube one by one....still the same...i don't think it's a tube.

Well I hope you didn’t do the power tubes that way!