Bogner Front Loads

[steve_k]

I run all V30's in my FL Ubie and it kills! The V30's are well broken in from many hours
of hammering it on home
I dug it with the 30/75 mix but felt the 75's were effecting the clarity and efficientcy.
Killer either way.

When I get my others delivered, I will probably set one up with all 30's for my Shiva and see how it works with the XTC. But, I am digging it as it is with the XTC and TJ. Cool thing about the FL's though is that once the iron is hot, swapping a couple speakers is a snap, not having to remove the back.

Steve

 

[mightywarlock]

I might be ordering an Uberkab shortly, if i can only selly my K-100 loaded Marshall cab soon!
anyone want some K100's? I was even considering parting the cab out...which is a shame, as i think it is a good cab...but oh well...

My TJ arrives sometime today!

 

[glip22]

I might be ordering an Uberkab shortly, if i can only selly my K-100 loaded Marshall cab soon!
anyone want some K100's? I was even considering parting the cab out...which is a shame, as i think it is a good cab...but oh well...

My TJ arrives sometime today!

Don't play around too much like I did. Get those Winged C EL34's in there. Trust the others. My Uberkad is OFD. All 108#s of it.

 

[mightywarlock]

OFD?

and 108#'s? really?

and since I can basically drive to Bogner and have them work on it if needed, I can always have them mod it later...but for now will stick stock so I can get used to it.

 

[jlbaxe]

OFD? Out For Delivery?

 

[glip22]

OFD!!!!

 

[Rev]

So what are the going rates for used FL Uber cabs? I found one in my area but it looks a little beat for $600. Is this a fair deal or can should I expect to see something better?

http://orangecounty.craigslist.org/msg/2120384493.html

 

[glip22]

So what are the going rates for used FL Uber cabs? I found one in my area but it looks a little beat for $600. Is this a fair deal or can should I expect to see something better?

http://orangecounty.craigslist.org/msg/2120384493.html

I paid 850 shipped across the country for mine. It was direct from a dealer and brand new but had a ding in the Tolex that happened during shippingfrom Bogner they did not see right away. I repaired it and it looks brand new. Great cab!

 

[steve_k]

So what are the going rates for used FL Uber cabs? I found one in my area but it looks a little beat for $600. Is this a fair deal or can should I expect to see something better?

http://orangecounty.craigslist.org/msg/2120384493.html

Make sure its a front load Uber. They haven't been out too long to get really beat up yet. For 600, if it wasn't on Craigslist, I would buy it. Hard to find new or used. I have another FL and a RL sitting at Tone Merchant's right now that came straight from Bogner.

Also, don't discount the original RL Ubercabs. I have one of those too and have owned them before. They still kick ass!

Steve

 

[Rev]

So what are the going rates for used FL Uber cabs? I found one in my area but it looks a little beat for $600. Is this a fair deal or can should I expect to see something better?

http://orangecounty.craigslist.org/msg/2120384493.html

Make sure its a front load Uber. They haven't been out too long to get really beat up yet. For 600, if it wasn't on Craigslist, I would buy it. Hard to find new or used. I have another FL and a RL sitting at Tone Merchant's right now that came straight from Bogner.

Also, don't discount the original RL Ubercabs. I have one of those too and have owned them before. They still kick ass!

Steve

I'm just starting to do my research now to be in the market for the New Year. I heard that the FL haven't been out long, so few and far between I'm guessing huh?

Are you getting the standard V30/75 mix or something different?

 

[steve_k]

The one here is 30/75. The one to be shipped is 30/100.

Steve

 

[Rev]

The one here is 30/75. The one to be shipped is 30/100.

Steve

Be sure to let know your thoughts on the differences once you get it?

 

[glip22]

The one here is 30/75. The one to be shipped is 30/100.

Steve

Be sure to let know your thoughts on the differences once you get it?

This. I am holding on to 2 K-100's. You already know that Steve.

 

[mightywarlock]

Finally sold my K100 cab, so next week hopefully I can get the Uberkab.
Heard from Reinhold today, but they are closed for this week, so hopefully will pick it up next week.

 

[Rev]

So did you get you FL yet? I'm eager for you to do some clips of it.

 

[steve_k]

More Bogner cabinetry incoming......

Front load version with V30/K100's and a rear load V30 in an all black, both custom ordered. New custom black shell for the 20th Shiva to match the shell on my 20th XTC.

Steve

 

[glip22]

More Bogner cabinetry incoming......

Front load version with V30/K100's and a rear load V30 in an all black, both custom ordered. New custom black shell for the 20th Shiva to match the shell on my 20th XTC.

Steve

 

[mightywarlock]

So...took a drive over to our friendly neighborhood amp designer this afternoon and lookie what I came home with...

tried it out with a special modded TJ and holy moly....

tried it with mine, and ...

I'm getting mine modded after NAMM for sure!!

 

[steve_k]

I would be flat ass broke if I lived in your neighborhood........

 

[glip22]

tried it out with a special modded TJ and holy moly....

tried it with mine, and ...

I'm getting mine modded after NAMM for sure!!

What's the mod? Inquiring minds want to know.....

Do tell. Did you go directly to Bogner? I'm curious about the mods and the cost.