iamjoe
Member
Hey guys, I am about to buy a Bogner Uberschall Revision Green from a forum member. I have a large pedal board so loop performance is important to me. Can anybody chime in?
jc986
Member
The Uberschall's loop is line level (as opposed to instrument level) so it's designed to work best with rack effects. I've got an Uber on the way as well (although a Rev Blue) so I've been researching this stuff a lot recently. Depending on the pedal you may or may not notice any issues.
leib10
Well-known member
It isn't bad, for some reason it's louder than my Twin Jet's.
Bronco
Well-known member
I've had two, and always found it to be very dark. Don't care for it personally.
JPH-214
New member
I have a Rev 2 and a Blue. I run a fair amount of pedals. I find if you keep the channel volume around 10 o'clock, then it doesn't over power the pedals as much. Anything over that, and I started to notice issues, especially with MXR stuff. I build pedal boards on the side, and have had to work around lots of amp loop send levels for sure. Rack FX are certainly better in the Uber loop, but if you keep an eye on the channel volume, you should have no problem. Is it Adlene's old green?
A
Adleneknot
Banned
New member
Yeah it was Mine J 
I have never used the FX loop.
I have never used the FX loop.
iamjoe
Member
JPH-214":1hc4n7ci said:
Yes sir, I reduced the pedal board to what I consider to be my essentials. Hopefully I can get a good set up going.
JPH-214
New member
Nice board man! I actually build pedal boards on the side, so I know a good one when I see It! Those Strymons sound great in the Bogner loop, but man, what power hogs, lol.