Mr. Willy
Well-known member
Apparently I’m dumb. I can’t figure this out. I’ve got a Voodoo Lab Pedal Power 2 I want to power an Eventide Micropitch.
I’ve read the manual for the pedal power. It says this:
You can power an Eventide Stompbox, like TimeFactor or PitchFactor, using a special “current doubling” cable. This is a parallel Y-cable used to combine both outputs 5 and 6 to double the available current. Set switches 5 and 6 both away from NORMAL and use a current doubler adapter (not included) with the red 5.5 x 2.5mm barrel cable.
But I’m not sure which of these on their site is correct: https://voodoolab.com/cables/
Help a dummy out, please.
I’ve read the manual for the pedal power. It says this:
You can power an Eventide Stompbox, like TimeFactor or PitchFactor, using a special “current doubling” cable. This is a parallel Y-cable used to combine both outputs 5 and 6 to double the available current. Set switches 5 and 6 both away from NORMAL and use a current doubler adapter (not included) with the red 5.5 x 2.5mm barrel cable.
But I’m not sure which of these on their site is correct: https://voodoolab.com/cables/
Help a dummy out, please.
