Might have been asked before but I'm looking for a conclusive answer as the manual doesn't explicitly state this.
My Friedman Runt 50's 8 ohm out -> my Captor X's 8 ohm in.
Volume Level (attenuation) set to mid or low on Captor (head sees the 8 ohm load provided by the Captor).
16 ohm cab plugged into the Captor's speaker output ONLY when Volume Level is set to mid or low to avoid mismatch - it this safe or can I hurt the Captor with this?
Cheers
My Friedman Runt 50's 8 ohm out -> my Captor X's 8 ohm in.
Volume Level (attenuation) set to mid or low on Captor (head sees the 8 ohm load provided by the Captor).
16 ohm cab plugged into the Captor's speaker output ONLY when Volume Level is set to mid or low to avoid mismatch - it this safe or can I hurt the Captor with this?
Cheers
Last edited: