Ceriatone 100w HRM - Build thread :) Updated! Finally done!

[cyndicate]

Finally! Fixed all the tone controls and the C-lator is working, just need to tweak the internal trimmers, sounding normal now

 

[jmgman69]

Finally! Fixed all the tone controls and the C-lator is working, just need to tweak the internal trimmers, sounding normal now

Very cool post!!

 

[cyndicate]

Finally! Fixed all the tone controls and the C-lator is working, just need to tweak the internal trimmers, sounding normal now

Very cool post!!

Thanks! One other side note for any one building the C-lator, Before you ground the tabs you should scrape off the paint at the tabs or else this isn't going to provide a ground to the rack chassis, I learned the hard way and shocked myself last night because the ground ended up flowing out the in/out jacks

 

[dstroud]

Finally! Fixed all the tone controls and the C-lator is working, just need to tweak the internal trimmers, sounding normal now

Very cool post!!

Thanks! One other side note for any one building the C-lator, Before you ground the tabs you should scrape off the paint at the tabs or else this isn't going to provide a ground to the rack chassis, I learned the hard way and shocked myself last night because the ground ended up flowing out the in/out jacks

awesome you got it done! but I know that getting shocked does not feel good!

 

[cyndicate]

Finally! Fixed all the tone controls and the C-lator is working, just need to tweak the internal trimmers, sounding normal now

Very cool post!!

Thanks! One other side note for any one building the C-lator, Before you ground the tabs you should scrape off the paint at the tabs or else this isn't going to provide a ground to the rack chassis, I learned the hard way and shocked myself last night because the ground ended up flowing out the in/out jacks

awesome you got it done! but I know that getting shocked does not feel good!

Yep that thing hit me by surprise

I think everything should be fixed now, adjusted the internal trimmers, for anyone building it, it affects only the OD channel i believe, (closest to inputjack in this order Treble, Bass, Mid). Will probably do a burn in today.