G
guitarlegend1986
Member
Hi, im new to the board, just got my first vh4s off of ebay and i think it's messed up. I'm running it into a stereo mesa 412....the speaker B output is in the 2x8/1x4 ohm output going into one of the 4 ohm inputs on the cab....the speaker A is connected the same into the other 4 ohm input on the cab...is this right? Now when i play, the A side master works fine into either of the 4 ohm inputs (i've tried switching the connection)...but the B side pops when i turn it up and then has practically no volume....when facing the front of the amp the 2 6550 tubes on the left have a bluish glow to them. Could that be the problem? The tube failure lights on the back aren't lit up. Also seem to have a pretty excessive hum that follows the pop, even with the guitar volume off....only way to kill it is with the mute....i've had several amps in my amp room cranked up and never experienced a hum before....I would greatly appreciate any help you guys could give. Thanks a ton!
Brian K.
Brian K.