Digitech Metal Master Heavy Metal Distortion -
This is a bit of a hidden gem, now discontinued.
$50 shipped/paypal'd.
SOLD Dunlop Crybaby Kirk Hammett model wah. SOLD
SOLD Voodoo Amps STL-1 Speaker to Line Out Box SOLD
This is like new, barely used.
$125 shipped/paypal'd
High quality box here; transformer balanced/isolated:
http://www.voodooamps.com/home/Prod...rToLineLevelBoxes/STL1/tabid/365/Default.aspx
"The STL-1 is used to provide a transformer-isolated signal from any guitar amplifier speaker output jack to line level signal. You can now capture the tone of the entire amp, including the power tubes, output transformer, etc and convert it to line level signal! Looking for the Brown Sound? Don't have an FX Loop? Want to record direct? Check out the STL-1"
FEATURES
APPLICATIONS & USES
This is a bit of a hidden gem, now discontinued.
$50 shipped/paypal'd.
SOLD Dunlop Crybaby Kirk Hammett model wah. SOLD
SOLD Voodoo Amps STL-1 Speaker to Line Out Box SOLD
This is like new, barely used.
$125 shipped/paypal'd
High quality box here; transformer balanced/isolated:
http://www.voodooamps.com/home/Prod...rToLineLevelBoxes/STL1/tabid/365/Default.aspx
"The STL-1 is used to provide a transformer-isolated signal from any guitar amplifier speaker output jack to line level signal. You can now capture the tone of the entire amp, including the power tubes, output transformer, etc and convert it to line level signal! Looking for the Brown Sound? Don't have an FX Loop? Want to record direct? Check out the STL-1"
FEATURES
- LEVEL - output control pot
- INPUT Amp - connects to speaker output on amp
- THRU Speaker - connects to speaker / load
- OUTPUT Line Level - connects to effects, power amp, etc
- GND / LIFT - ground lift switch
- Transformer isolated - will not change your amps tone
- Passive design - No AC power required
- 100% Hand Wired in the USA
- Perfect for touring, at-home playing or for recording
- Dimensions - 4.67" x 3.68" x 1.18"D (pedal size!
APPLICATIONS & USES
- Vintage & Modern Amps – Send a line level signal into an effect processor or even your favorite pedals. The effected / wet output of an effects unit can be sent to an amplifiers “Return” jack (effects loop) or power amp with speakers to have a Wet/Dry setup or even Wet/Dry/Wet (IE: true stereo).
- Slaving - Another common purpose is to slave one amp into another. Connect one end of an instrument cable from the STL-1’s “Output” and connect the other end to the input of another amplifier. This technique can be used to get similar results to “brown” tone featured on early EVH recordings.
- Recording - Send a balanced line level signal to a recording / mixing console, mic-pre, Pro Tools, etc