Help me with my JMP-1 and GSP1101

  • Thread starter Thread starter geetarmikey
  • Start date Start date
geetarmikey

geetarmikey

Active member
Recently bought a JMP-1 exclusively for my amp sounds and I want to now use the GSP for effects.

How do I hook these up, so for example Channel 1 is a straight unaffected clean sound and Channel 2 is clean, but with effects from the GSP?

I'll be using a Behringer FCB to switch everything too.

Thanks!
 
So the GSP would essentially be in the loop of the JMP? That would make sense as i only need it for mod/delay/verb.

Any tips on setting up the MIDI?

Thanks again!
 
geetarmikey":3u8dizrz said:
Recently bought a JMP-1 exclusively for my amp sounds and I want to now use the GSP for effects.

How do I hook these up, so for example Channel 1 is a straight unaffected clean sound and Channel 2 is clean, but with effects from the GSP?

I'll be using a Behringer FCB to switch everything too.

Thanks!
Click to expand...

Interested in this as well.
 
Bump because I know someone here can help me haha!
 
Hi!
Ive owned both n still have the 1101.
My suggestion would be to put the JMP1 in the loop of the 1101.
Even if u only want mods n delays; the loop on the 1101 is more transparent.
In the 1101's global setting you set it to "external preamp" or "external amp".....something
like that. So ur amp tones would always be coming from the JMP.
Also, later if u wished u could add comp, drive from the 1101 to the front of the JMP
as well; why limit urself when the option is present.

GUITAR TO GSP input
GSP Loop Send to JMP input
JMP output to GSP loop return.

the GSP back has these labelled very easy by the way!
For midi switching do Footswitch midi out to GSP midi in; GSP midi out to JMP midi in. ull
have to make sure they are on the same channels and preset numbers are not offset.
Hope that helped!
Cheers
Faisal
 
Also, in the GSP u want global cab off if ur running thru ur velocity n marshall 2x12
 
You must log in or register to reply here.
Back
Top