Help! - No idea how to use MIDI on D-Moll

  • Thread starter Thread starter Randy
  • Start date Start date
R

Randy

New member
Hi guys,

Recently I got my first Diezel. It's the new D-Moll. I'm really happy with the amp but now I wanna try to config it via MIDI with my Korg AX3000G. The problem it's that I have absolutely no idea about doing this. I've read the korg manual and the Herbert manual but I can't figure out how I must configurate the amplifier. What I'm looking for is just the standard configuration: ch1 - bank 1, ch2 - bank 2, ch3 - bank 3.

Anyone has the korg ax3000g and have configured the Herbert or the D-Moll. Anyone han give some tutorial or something to figure out how to do it by myself?.

Thanks in advantage!
 
It is actually very simple.
Connect your Korg AX3000G's Midi out to the Midi in of the D-Moll.
Every time you change presets on the Korg AX3000G, it sends a program change Midi signal. For each one of those, your D-Moll can respond with a different preset of its own.

In short:
Press a preset on the Korg AX3000G. This causes the D-Moll to receive the Midi program change signal. At this time, configure your D-Moll as you like using the switches in front, and when done, press the Store switch twice. The preset is stored. Hereafter, every time that preset is selected on the AX3000G, the amp will respond with the same configuration as programmed.

Proceed with the same methodology for all your AX3000G presets. If you need to change an existing preset on the D-Moll, follow again the same procedure, configure your D-Moll and press the Store switch twice. The new preset has been stored and will be recalled thereafter with the same AX3000G preset.

Enjoy your D-Moll, it is an amazing amp!..
Cheers,
Adrian
 
Thanks Adrian, I figured out how to do it and it's exacty like you say, but I have to press the button "write" on the AX3000G after double pressing the Store switch on the D-Moll.

Indeed it's an amazing amp! :)
 
You must log in or register to reply here.
Back
Top