Help with 2013 MiM Charvel wiring

  • Thread starter Thread starter WhiteShadow
  • Start date Start date
WhiteShadow

WhiteShadow

Active member
Had a couple wires come loose. Looks like one is from the neck pickup, and the other is a black wire that looks like its supposed to run from the toggle switch to possibly the potentiometer. Its a MiM san dimas with HH config. Only one volume pot, non coil splitting, and one 3 way toggle. Can someone help me out with a wiring diagram? Thanks!
 
Is it dimarzio or Seymour Duncan pickups? SD has worong diagrams on their website.
 
They don't have anything for a basic HH, 1 vol (non coil splitting), 1 toggle setup
 
SD 4 conductor humbucker wiring is red & white together, green & silver to ground. Black is hot.
 
Its these two wires
IMG_1391.jpeg
IMG_1392.jpeg
 
Thats your ground wire from the claw.
You got like 5 black wires fuggin mexican electricians.
Plug the guitar into a practice amp and touch that wire between switch & pot til you hear it come alive.
 
Thats your ground wire from the claw.
You got like 5 black wires fuggin mexican electricians.
Plug the guitar into a practice amp and touch that wire between switch & pot til you hear it come alive.
What about the other one coming from the switch?
 
Here you go, just have to scroll thru the pull down menu to find you setup
 

Attachments

  • Screenshot_20240124_120248_Chrome.jpg
    Screenshot_20240124_120248_Chrome.jpg
    531.1 KB · Views: 405
Back
Top