How do I incorporate my IEM's into my rack gear?

  • Thread starter Thread starter jlbaxe
  • Start date Start date
jlbaxe

jlbaxe

Banned
Active member
Hey Dave
I posted this on the main forum but didn't get any answers.
Ok I have everything worked out but how to set up the in ear monitors. The Axe II gets it signal from either the direct out of the SS4 for effects or one of the 4 "to amp" like an amp head.
Here is basic setup:

1   Monster 2500                
2   Pro HD                                  USB  laptop interface
3    
4   Axe II                               To VHT 2/90/2
5    
6   L6 G 90 Wireless                   Input to rack wah
7   Dunlop Rack wah  2SR     to SS4
8   Egnater SS4                       To ADIG-LB. Mesa Mk III, 20th X, Axe II, L6 Pro Hd
9   RJM Mini Amp Gizmo          Switches 20th X
10 Palmer PGA ADIG-LB         to RT2/50
11 Carvin IEM                                                            
12 Soldano Space Box              Loop of Bogner
13 
14 
15 VHT 2/90/2 to (2) Cameron 1x12 cubes
16 
17 Randall RT 2/50 to Bogner 412
18
 
 
how are you using the stuff... sounds like you need a mixer to mix all the outputs to the iem. I use an axe2 to a behringer mixer, bring a band mix to the mixer, and a split off my vocal mic, so i have total control over my mix, then out to a carvin em900.
 
dpeterson":2ctlkad6 said:
how are you using the stuff... sounds like you need a mixer to mix all the outputs to the iem. I use an axe2 to a behringer mixer, bring a band mix to the mixer, and a split off my vocal mic, so i have total control over my mix, then out to a carvin em900.
Click to expand...

I run 2 amps into the Egnater amp head switcher and from the switcher to the Palmer PGA 04 for recording/ jam'n at night. From the Palmer to the RT2/50 out to a Bogner 412. the Axe and Pro Hd are in line 3 and 4 of the amp Switcher.

Im hoping the line out on the Egnater switcher will do the trick. There are 4 independent line out (mixer) controls on the front of the SS4 . With the Axe and Pro Hd I believe I can run it like the preamp of a amp head --"to amp" input of Axe, Axe out 2 (FOH)back into "return from amp"

I want the Axe and Pro HD to run into the VHT 2/90/2 out to the Cameron 1x12 cubes. Wet stereo or as amp/effects

I am out of rack spaces :aww: It is just a personal rig for home use, no band :lol: :LOL: I know I'm :loco:
 
You must log in or register to reply here.
Back
Top